Will the EcoHitch EH59FR Fit a 2016 F-250 With a SteelCraft Brush Guard?

Question

Question:

Will this work with a steelcraft brush guard?

asked by: James

1

Helpful Expert Reply:

From what I could find out about where your SteelCraft brush guard installs, there doesn't look to be a way to get a hitch installed as well. The EcoHitch # EH59FR will install in the exact same place so it would need to be one or the other, unfortunately.

I also checked the other options we have for a front mount hitch on your 2016 F-250, but they all install in the same place as well.

expert reply by: Lazer S

1

Answer 1

Although it mounts to the sides of the front frame members instead of the tow hooks, the EcoHitch #EH59FR front mounted receiver would install so that the receiver tube sits behind the license plate holder. The Curt #C31018 and Draw-Tite #65049…

view full answer...

Answer 2

Thanks for the picture! I have a solution for you but it does look like your dual steering stabilizer bars will be in the way for you to mount the Draw-Tite Front Hitch item #65049. Instead you will want to use the EcoHitch Hidden Front Mount…

view full answer...

Answer 3

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need…

view full answer...

Answer 4

Yes, the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" item #EH59FR is a confirmed fit for your 2013 Ford F-350 Super Duty. I've attached a photo from EcoHitch showing what it looks like once it's installed.

view full answer...

Answer 5

The EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH59FR has the largest capacity vertical load limit in a front mounted receiver hitch for your 2016 Ford F-250 at 1000 lbs.

view full answer...

Answer 6

The actual weight of the EcoHitch front hitch part #EH59FR is 57 lbs. The good news is that the weight of hitches does not count against the vehicle's weight capacity since essentially the hitch becomes part of the vehicle chassis and is not a…

view full answer...

Answer 7

That is a good question and the answer is no, you do not have to remove the front bumper on your 2015 Ford F-250 to install the EcoHitch front hitch that fits, which is the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver…

view full answer...

Answer 8

While we have an option for you, from the photos I've seen, the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH59FR looks to extend ever so slightly past the tow hooks. So what I recommend instead for your F-250 is a front hitch from…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will the EcoHitch EH59FR Fit a 2016 F-250 With a SteelCraft Brush Guard?

Product Page this Question was Asked From

Continue Researching