What is the Square Opening Size of the Curt Fat Tire Wheel Hoop part # C18091

Question

Question:

Could you tell me what the size of the Square hole is where they actually slide onto the rack?

asked by: Bryan R

0

Expert Reply:

The size of the square opening of the Curt fat tire wheel hoop part # C18091 is 1-1/4 inch by 1-1/4 inch.

expert reply by: Jameson C

0

Answer 1

The Curt 2 Bike Platform Rack #C18085 is compatible with tires up to 3" wide. Anything wider than that and you need the Fat Bike Adapter Kit #C18091 which can accommodate tires up to 4-7/8" wide. If you don't already have the bike rack…

view full answer...

Answer 2

The Reese Q-Slot PS63138 has a bar that is 1-1/4 inches. The Fat Bike Adapter Kit for Curt Platform Bike Racks #C18091 will fit this carrier well. I went out to the warehouse to confirm the fit for you.

view full answer...

Answer 3

The Replacement Wheel Loop - SportRack Wheel-Mounted Bike Racks - Right Side #05004700000 will slide onto 1-1/4 inch bars which is also the size of the bars the wheel hoops slide onto for the Q-Slot Bike Rack PS63138 so it will work as a…

view full answer...

Answer 4

It may be possible to replace the wheel cradles of your TransIT Flatbed 4DLX though we do not carry that brand so you will need to know how the cradles go on the rack and I wasn't able to tell from my research exactly how the cradle went on this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

What is the Square Opening Size of the Curt Fat Tire Wheel Hoop part # C18091

Product Page this Question was Asked From

Continue Researching