Will Spindle # TRU37FR for Trailer Allow Use of Standard Hubs and Brake Assemblies
Question:
I have older 3inch OD mobile home I think axles that i want to install new 2x12 complete brake assemblies on. The flange offset is not correct to match the hub so I am thinking your new spindles will fix my problem. How can I be sure the ID is 2.25inch to match your spindles? Thanks,
asked by: Matt I
Helpful Expert Reply:
Mobile home axle components are considered one time use and are mainly all non-standard parts which means that if you attempt to replace anything on them you find that nothing fits or matches. If you went with a new spindle like the part # TRU37FR you'd be able to install standard spindles and brake assemblies no-problem but they wouldn't bolt up to what you have now.
The hub/drum part # AKHD-655-6-EZ-K would match this spindle and then for brake assemblies # 23-458-459.
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Video: Review of etrailer by AxleTek Trailer Axles - 6,000 lbs 95 Inch Axle w/ Electric Brakes - e35SR
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 6,000 lbs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 95" Long - 5,200 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Q&A: Can I Use the Quick Splice Connectors to Install a New Wishbone 4-Flat Trailer Harness
- Q&A: How to Wire Second Axle of Trailer for Brakes
- Q&A: Gauge of Wiring in 35 Ft 4-Way Trailer Wiring Harness # A35W42B
- Video: Bearing Repacking and Grease Seals Installation
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-468-469 Review
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Video: Trailer Wiring Harness Installation A35W42B
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Q&A: 5200 lb Dexter Hub Bearing Kit Recommendation
- Q&A: What Spindles Should be Used on Dexter 7k Trailer Axle
- Q&A: How Can the #42 E-Z Lube Spindle Fit Both a 5.2K and 7K Axles
- Q&A: What Size Axle Does the Spindle part # TRU37FR Fit
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Video: Choosing the Right Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Trailer Wiring
- Search Results: trailer brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer lights
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation
on Trailer Spindles
