What Parts Are Needed to Tow a 1997 Jeep Wrangler?
Question:
1997 JEEP WRANGLER 4 CYL TOWABLE 4 WHEELS DOWN?
asked by: PAUL O
Expert Reply:
Your 1997 Jeep Wrangler can definitely be flat towed. We can also get you all the needed parts to achieve this, but there are a few things that will determine which parts are needed.
If you have an off-road bumper that has D-Rings, you can use the Roadmaster # RM-035 for 3/4 inch D-Rings, or # RM-035-1 for 1 inch D-Rings.
If you have a factory bumper or a double tube bumper, you will need the Roadmaster # RM-521424-4. It should be noted that this does not fit models with front leaf springs, however.
The wiring will depend on if you are going to use a braking system or not. If you are not, the Roadmaster # RM-154 will have a 4 flat and will get all the lights working on your Jeep. If you are using a braking system, which is recommended, the # RM-15267 will include a 7 Way plug and all diodes needed for the lights and brake system to work properly.
For a braking system, the Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR is the one I suggest. This is easy to use and easy to install. The # RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn.
The only other things you will need will be a tow bar, like the Roadmaster Falcon 2 Tow Bar # RM-520, and the safety chains # RM-643. This will be everything needed to get you towing your 1997 Jeep Wrangler.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Tow Bar Braking Systems
- Brake Light Relay
- Roadmaster
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Weather Resistant Non-Slip Rubber Pad For RV Steps, Bumpers, And Ladder Rungs
- Q&A: Suitability of Draw-Tite Class I Receiver Part # 24631 for 1998 Jeep Wrangler with C Channel Bumper
- Q&A: Replacement Hardware Kit for Curt 13408 For Jeep Wrangler TJ
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V
- Q&A: Fit of Curt # 13408 Trailer Hitch on 1997 Jeep Wrangler w/ Smittybilt Aftermarket Rear Bumper
- Q&A: Does Bumper have to be Removed to Install Front Mount Trailer Hitch on 2006 Jeep Wrangler Unlimited
- Article: 2023 Best Gifts for Boaters & Fishing Enthusiasts
- Article: Flat Tow Package for 2011-2013 Jeep Grand Cherokee
- Article: Performance Chips and Modules