How To Connect Wires From Brake Controller To Wires Under Dash On A Ford F-53 Chassis
Question:
My motorhome does not have a controller port but has pigtails as shown in the picture. Your description of the wire functions on the controller dont correlate with the functions described on my pigtail label. Photo enclosed
asked by: Gil J
Expert Reply:
The wires may not match color for color so you would have to match the functions. Start with the ones that are obvious. The white on both are ground wires. Make that connection. Blue on both are same function. Make that connection. All you have left is the red and black wire from the controller. The red wire is going to connect to the Lt green wire under the dash. The black wire is going to connect to the red wire under the dash.
Product Page this Question was Asked From
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Up to 4 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: What Size Wire Should you Use with a 13K-LB Winch
- Q&A: Replacement Leaf Spring for a Dexter 072-097-00
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How Does Curt TriFlex NEXT Brake Controller Mount
- Article: Trailer Maintenance Schedule
- Q&A: Replacement For TDE LP75 Disc Brake Actuator
- Q&A: Possible Replacement Trailer Tire for a 145R13 Trailer Tire
- Q&A: Availability Of Curt Trailer Hitch For A 2024 Hyundai Santa Fe Hybrid