bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Recommended Replacement Hub With Inner Bearing L68149  

Question:

I need hub that has inner bearing 1.378 an outer bearing 1.25

0

Expert Reply:

With the inner bearing having a 1.378" inner diameter, you have an # L68149 bearing. The 1.25" inner diameter can be a few different bearings, but these measurements are not typical. With that being said, we do not have a hub that will match these. If this is an older trailer, it may be a good idea to replace the axle.

Something like the Dexter # 35545I-ST-89 will use one of the most common bearing combinations and actually has the hubs included. However, this will measure 74 inches from center to center of the spring seats and 89 inches from hub face to hub face. This also has flanges on the spindles which will allow you to add brakes on at some point if needed.

What may be a better option would be the Timbren Axle-Less system # A35RS545. This will also include the 5 on 4 1/2 hubs and brake flanges. but it is not dependent on matching your measurements. This will install on either side of the frame and will give you independent suspension, making the ride better as well.

expert reply by:
0
Lazer S
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

Dexter Axle Trailer Axles - Leaf Spring Suspension - 35545I-ST-89 Review
Dexter Axle Trailer Axles - Leaf Spring Suspension - 35545I-ST-89 Review - Video
Timbren Axle-Less Trailer Suspension System Installation
Timbren Axle-Less Trailer Suspension System Installation - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>