Length Of The Solera 16' White Fade RV Awning

Question

Question:

what does your awnings measure exactly for instance 16 foot awning is it exactly 16 feet

asked by: Tom

0

Expert Reply:

The fabric on the Solera 16' White Fade RV Awning Roller and Fabric (Std) # LCV000211492 is 16'. The roller and arms will stick out past the 16' of awning so you'd be looking at closer to 16.5'-17' total when you add those in.

expert reply by: Kevin C

0

Answer 1

Thanks for that photo it was super helpful, and let's start with the easiest thing first, which is the 3 inches of clearance you have on the sides. Since slide toppers need 7 inches of clearance on the sides, what you will need to do is order the…

view full answer...

Answer 2

I suggest the Solera RV Slide-Out Awning - 9'7" Wide - 48" Projection, #LCV000163292 for white or #LCV000251461 for black. For determining the proper size Solera Slider you need, to measure the total width of your slide room from the…

view full answer...

Answer 3

Of course, I have the following recommendations from Solera based on the measurements you gave me: Closet 59": Black #LCV000168104 or White #LCV000163273. Kitchen 149.5": Black #LCV000165061 or White #LCV000163299. Living Room 142.5":…

view full answer...

Answer 4

Since you need 6 inches of clearance and only have 2.75 inches, there's no reason you couldn't simply use the shorter, 7 foot slide topper #LCV000168105. The trade-off, as you're undoubtedly aware, is that the 7 foot topper is not going…

view full answer...

Answer 5

The total length of the Solera Replacement Pitch Arm, #LC67VR, is 33 inches. Keep in mind that this is a specific replacement part for a specific awning, the Solera XL 63" flat awning support arm. If you have a different brand awning, please let…

view full answer...

Answer 6

Thank you for that measurement, and we do have the exact slide topper for you, and it is available in black. And since you have the Solera flange prep, you will also need an adapter, called an Access Kit. Here are the parts you will need: - Solera RV…

view full answer...

Answer 7

The brackets for a Lippert Solera Slide-Out (Slide-Topper) Awning will extend out about 2-1/2" more than the awning fabric itself on either side. So the part #LCV000184673 that you mentioned, for example, has fabric that is 133" wide. This…

view full answer...

Answer 8

The Replacement Slide-Out Hex Bar Extension Bracket for Solera Slide-Topper Awnings - Black #LC2724412 is 7 inches long and the mounting portion of the plate is roughly 2 inches. I've attached a drawing that shows the mounting hole dimensions to…

view full answer...

Answer 9

I was able to get a diagram from lippert for you, see below: **Solera Rollbar Only for 15' Black Awning, Black Tube #LC260560333. The width of the mouth is 3.68 millimeters and the diameter is about 6 millimeters.

view full answer...

Answer 10

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 11

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 12

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...

Length Of The Solera 16' White Fade RV Awning

Product Page this Question was Asked From

Continue Researching