What Are The Dimensions Of MAX Winch Mount Tray 46-23735?

Question

Question:

I have a 2011 F-350 with a grill guard Ranch Hand Legend and am trying to decide if this winch tray will fit between the uprights. This is one of the few winch trays that does not appear to interfere with how the grill guard mounts. Two key measurements I need are: - Width of the widest point of the tray - Depth from the widest point of the tray to the ear on the mounting bracket that attaches to the bumper Thank you.

asked by: TAYLOR D

0

Expert Reply:

As seen in the attached photos, the Westin MAX Winch Mounting Tray - Black Powder Coated Steel # 46-23735 measures 44" long and measures 10" from the front of the tray to the mounting tab. This is confirmed to fit the 2011 Ford F-350.

expert reply by: Andrew N

0

Westin MAX Winch Mount Tray Length
(click to enlarge)

Westin MAX Winch Mount Tray Width
(click to enlarge)

Answer 1

We don't have just the hardware of the Westin MAX Winch Mounting Tray #46-23735 that you referenced but I attached a picture that I took from the install instructions that shows all of the bolt and nut sizes you'd need. You'd be able to…

view full answer...

Answer 2

For your 2022 Chevy Colorado I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98909. It has the same capacities as the other option, the Curt Trailer Hitch Receiver #C13176, but it has two key…

view full answer...

Answer 3

I have a few different e-bike racks for you to check out and the differences really just boil down to the weight of the rack and the features it comes with. The first recommendation I have is the Hollywood Racks Destination E Bike Rack #HLY66ZR which…

view full answer...

Answer 4

For your 2019 GMC Canyon, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98909 will be a great choice. The mounting location won't interfere with your bumper steps and the capacities of hitches are…

view full answer...

Answer 5

Installation of the Westin #40-2375 Sportsman Grille Guard will not require removal of the tow loops. The installation brackets attach to the vehicle using the bumper bolts, as you can see in the photo I've edited for you. This grille guard would…

view full answer...

Answer 6

If you have the Westin Sportsman Grille Guard part #40-2375 then you will need the Replacement Installation Hardware Kit for Westin Sportsman Grille Guard part #40-237PK to mount this on a 2015 Ford F-250. Please note, this hardware is not universal…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Are The Dimensions Of MAX Winch Mount Tray 46-23735?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching