Are There Instructions Available for the UWS A-Frame Trailer Toolbox UWS04530?

Question

Question:

I was trying to find the installation instructions or video to see if it can fit my trailer and how it’s mounted. Can you direct me to it’s location?

asked by: Even S

0

Expert Reply:

I have the instructions for the UWS A-Frame Trailer Toolbox # UWS04530 saved to the product page, so you can definitely reference those to get it installed and fitting properly. Unfortunately, we have not done any installs with this box as of yet, so we do not currently have any videos.

expert reply by: Lazer S

0

Answer 1

The Buyers Products Trailer Tongue Toolbox part #3371701680 does not come with mounting hardware. It can be secured in a number of different ways, most drill directly though the bottom of the box and into the frame. If you can find a way to mount the…

view full answer...

Answer 2

Though the UWS A-Frame Trailer Toolbox - 6.3 cu ft - Gloss Black #UWS01065 will measure 49 inches at the back, 24 inches at the front, 18 inches deep, and 21 inches tall, I cannot suggest using it as a propane tank case. This is due to propane tanks…

view full answer...

Answer 3

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 4

These toolboxes do not contain mounting hardware due to the different construction and mounting locations that may be required for many different styles of trailers. A lot of how you install the UWS A-Frame Trailer Toolbox #UWS01065 depends on where…

view full answer...

Answer 5

Depending on how you mount the battery inside the tongue mounted tool box like #3371701680, you may or may not need longer battery cables. Since your battery is already mounted in this location, you most likely just need to drill holes and reconnect…

view full answer...

Answer 6

Propane tanks can't be store inside of an enclosed container like a toolbox. If they build enough pressure it has to vent out to open air. That is why the plastic propane tank covers you see on trailers are open at the bottom. I recommend a…

view full answer...

Answer 7

The Dee Zee Plastic A-Frame Trailer Tool Box, part #DZ91717P, has an exterior height of 17-3/4-inches. Its interior height will be approximately 1-1/2 inches shorter according to my contact at Dee Zee. I measured a standard 20-lb propane tank here at…

view full answer...

Answer 8

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Are There Instructions Available for the UWS A-Frame Trailer Toolbox UWS04530?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching