Can I Use The Hitch Lock With A Kuat Transfer V2 3-bike platform rack with 2” hitch

Question

Question:

Want to lock the rack to the 2” hitch. Product description did not mention the Transfer V2 3-bike rack but your video said this can be added. Please help

asked by: WLee

0

Expert Reply:

According to Kuat, the Hitch Lock for Kuat Bike Racks - 2" Hitches, part # HL2, will work with your Kuat Transfer V2 Bike Rack for 3 Bikes - 2" Hitches, part # KU24FR. It is just not included with the rack.

I have included the demonstration link below.

expert reply by: Mark Smith

0

Answer 1

Yes it is. The Hitch Lock for Kuat Bike Racks - 2" Hitches, part #HL2, will work with the Kuat Transfer V2 Bike Rack for 2 Bikes but not the Kuat Transfer V2 Kuat Transfer V2 Bike Rack for 3 Bikes. The bike racks are secured to the vehicle…

view full answer...

Answer 2

I'm happy to inform you that the Hitch Lock for Kuat Bike Racks, part #HL2, is indeed compatible with your Transfer V2 Rack, part #KU24FR. This lock includes an integrated dust shield that keeps dirt and moisture out of the lock body.…

view full answer...

Answer 3

It seems odd, but the reason Kuat recommends using their 1/2 inch pin, #HL2, with their 2 inch bike racks is because a larger pin will interfere with the anti-rattle system in the bike rack's shank. To eliminate the movement of the pin, you…

view full answer...

Answer 4

To replace the hitch pin of your Kuat NV Bike Rack you will need to use the part #HL2, which includes both the pin and lock core (plus 2 keys). The pin unfortunately is not available by itself from Kuat as a separate part. There isn't one…

view full answer...

Answer 5

The Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #KU84FR comes with a tamper-resistant bolt that tightens the carrier to a 2" receiver and you need to use the included security wrench to remove or install. So…

view full answer...

Answer 6

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you…

view full answer...

Answer 7

Based on what I could find online it looks like the rear view camera on your 2021 Honda CR-V is located just above the license plate. The best bike rack when it comes to visibility of your backup camera is going to be the Kuat Transfer V2 item…

view full answer...

Answer 8

At one point, Kuat had specific lock numbers available but they have changed that recently in order to make ordering locks easier for their bike racks; due to this, specific lock numbers are not something Kuat makes available. The correct lock is…

view full answer...

Answer 9

The Kuat Transfer V2 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #KU64FR uses the #HL2.

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Can I Use The Hitch Lock With A Kuat Transfer V2 3-bike platform rack with 2” hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching