Will Bolt Trailer Hitch Lock BL7018448 Work With Keys For 2021 Ram 3500 Lonestar?

Question

Question:

Will I be able to use and properly key the Bolt with my 2021 Ram 3500 Lonestar?

asked by: James L

0

Expert Reply:

You sure will!

The BOLT Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitch - Codes to Chrysler/Dodge/Jeep Key # BL7018448 you were looking at is confirmed to work perfectly with the key you have for your 2021 Ram 3500 Lonestar so you will not have any issues.

I included a video of the # BL7018448 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

According to Bolt if you are using the emergency key from the FOB for your 2015 Ram it could be hard to get enough leverage to turn the key and unlock the hitch lock. Jiggling while turning may help to unlock the lock with the emergency key. They…

view full answer...

Answer 2

Yes you'd use the emergency door key of your 2021 Ram 1500 to key the BOLT Trailer Hitch Receiver Lock #BL7018448 that you referenced.

view full answer...

Answer 3

The Bolt #BL7018448 Receiver Lock does work with your 2021 RAM 2500 with 2-1/2" receiver and with a 5/8" hitch pin hole size. This will deter theft of your hitch receiver and ball mount. You might also be interested in the Bolt #BL7025286…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Will Bolt Trailer Hitch Lock BL7018448 Work With Keys For 2021 Ram 3500 Lonestar?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching