Can I Use the Yakima OnRamp with My Aventon Pace 350?

Question

Question:

Is this rack workable with a aventon pace 350 step through?

asked by: Steve H

0

Expert Reply:

Yes, the Yakima OnRamp # Y36FR will secure to your Aventon Pace 350. The adjustable frame clamps will secure your bike to the frame. The weight of your Aventon Pace 350 (46 pounds) will not be an issue.

expert reply by: Bob C

0

Answer 1

For your two Aventon Aventure fat tire ebikes, I recommend the Yakima OnRamp Bike Rack item #Y36FR as it will meet all your requirements. The maximum weight capacity is 66 lbs per bike, it has a 2" hitch for connection to your 2"…

view full answer...

Answer 2

We have 2 options for you to carry a 60 lb e-bike. The Hollywood Racks Sport Rider SE 2-Bike Carrier for Electric Bicycles - 2" Hitch - Tilting #HLY84FR and the Thule EasyFold XT Bike Platform Rack #TH903202. The Hollywood Racks Sport Rider…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The Hollywood Racks Destination part #HLY66ZR that you referenced was designed for E-bikes like your Aventon Pace 500 that doesn't have a top crosstube. The frame clamp is pretty flexible in how it can attach to bike frames like yours and what…

view full answer...

Answer 5

Installing a wiring harness, like the Tekonsha T-One Vehicle Wiring Harness #118467, on your 2020 Subaru Crosstrek will require access/removal of a few panels in the rear cargo area. I included an install video for you to check out that will…

view full answer...

Answer 6

The Yakima OnRamp Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount #Y36FR does mount into a receiver hitch but the "frame mount" in the title is about how the rack mounts to the bikes. The padded clamps attach to the frame of…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You should not need an extension for the Hollywood Racks Destination E Bike Rack #HLY66ZR to fit on your 2021 Jeep Wrangler Unlimited Sport. We installed this on a 2021 2-door Wrangler which I have included the install video linked near the bottom of…

view full answer...

Can I Use the Yakima OnRamp with My Aventon Pace 350?

Featured Help Information

Miscellaneous Media

Continue Researching