How to Pick Out Replacement Hub for Shoreland'r Trailer
Question:
Im looking for a pregreased wheel hub kit for a Shorelander boat trailer Model # LUV28BXXL S/N 1MDAJAU17CA479500 with surge brakes so it does need a vented hub. Do you sell anything like that or can I order the individual parts from you? Thank you.
asked by: Karry K
Expert Reply:
What is the axle capacity and bolt pattern of the hub of your trailer? With that info I can pick you out the correct parts but without that I don't have a way to look up what you need with just the trailer model number.
Otherwise in order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Yates Bow Roller for Boat Trailers - TPR - 4" Long - 1/2" Shaft - Blue
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: Replacement Hub for 1986 Shorelander Boat Trailer
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Q&A: Why Are Inner and Outer Bearings on Trailer Hubs Different Sizes
- Q&A: How to Connect two 12 Volt Batteries and Still have 12 Volts Output
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer jack
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Tire Sizing
- Search Results: lug nut
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Suspension Enhancement
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Search Results: lug nuts
- Article: How to Choose the Right Trailer Hitch Class
- Video: etrailer Electric Trailer Brake Kit Installation
on Trailer Hubs and Drums
