Replacement Hubs That Use the Inner Bearing LM67048 and the Outer Bearing LM11949
Question:
Hi. I’m looking for 5 bolt replacement hub assemblies for the attached pictured spindle. I took a few measurements so you can see what I have. Please let me know if there’s more information needed. Thanks
asked by: Mike
Expert Reply:
From the measurements provided in the photos, it looks like you have an inner bearing that has a 1.250 inch inner diameter and an outer bearing # LM11949, which has a .750 inch inner diameter. This leads me to believe you have some variation of agricultural hub, like the Redline Trailer Hub Assembly # AH15450ECOMP. This will use the inner bearing # LM67048 that will have the inner diameter of 1.250 inches. That being said, this has a 4 on 5 bolt pattern and will not match your 5 bolt wheels.
What I suggest doing will be to have the spindles replaced with a more common style. The TruRyde Square #84 Spindle # TRU47FR is rated for a 3,500 pound axle, or 1,750 pounds per spindle, and is a very common size and style. This would then pair with the etrailer.com Idler Hub # AKIHUB-545-35-K. This has a 5 on 4 1/2 bolt pattern that is one of the most common 5 bolt patterns. This would then pair with something like the Kenda Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel # AM3S140. This will be rated up to 1,360 pounds at 50 psi.
It should be noted that you may not need to replace the wheels, however. You will need to verify your bolt pattern on your current wheels to see which pattern you have. I have a diagram and measurements listed below for the 5 bolt patterns used on trailers. Depending on the bolt pattern you confirm, we have the hub available in all 4 bolt patterns as well.
If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
If D = 3", then the bolt pattern is 5 on 5"
If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 175/80-13
- 13 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: l68149
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: torsion axle
- Search Results: marine axle
- Search Results: 3500 lb axle
- Search Results: lm67048
- Search Results: torsion axles
- Search Results: torsion axel for trailer
- Q&A: Replacement Trailer Hub Grease Seal with Bearing Number L68149 and Race L44610
- Q&A: Grease Seal Recommendation for Dexter 4,400 lb Trailer Hub
- Q&A: Hub For Outer Bearing LM11949 & Inner Bearing LM67048
- Q&A: Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268
- Q&A: Replacement Grease Seal for AL/KO 10 x 2-1/4 Hub Drum
- Q&A: Grease Seal For Utility Trailer With Inner Bearing KL68149
- Q&A: Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly