Will Rhino Rack Side Loader Load Assist Work with Thule Aeroblade Roof Rack

Question

Question:

Can Rhino Rack Universal load assist work with Thule products we have? The Areo cross bars along with 2 sets of Thule Hull-a-port areo TH849000 kayak carriers. 4’ cross bars on a 2019 Subaru Outback and 4’6” cross bars on a truck topper.

asked by: William K

0

Expert Reply:

Yes the Rhino Rack load assist part # RR-RUSL can be used with your Thule AeroBlade crossbars. It also would work with the other racks you mentioned as well.

expert reply by: Jameson C

0

Answer 1

There are a couple things that you can try for fitting the Rhino-Rack Universal Load Assist #RR-RUSL on your crossbars with the J-style carriers installed. The first would be to try some of the different clamp sizes, the load assist should have…

view full answer...

Answer 2

The Rhino-Rack Universal Load Assist #RR-RUSL will fit properly on most larger roof rack crossbars. It is confirmed to fit on bars which measure as large as 3-1/8 wide and 1-7/8-inch tall so you can check your bars' thickness to confirm…

view full answer...

Answer 3

I do have an option for you but most load assists like the Rhino-Rack Universal Load Assist part #RR-RUSL won't work on factory roof racks as they require overhang which the flush systems don't have. Instead, I recommend the Yakima…

view full answer...

Answer 4

The Rhino-Rack Universal Load Assist #RR-RUSL comes with several brackets that work with numerous brands of aftermarket crossbars but none specific to OEM crossbars. I am confident that at least one set of the included brackets could be modified to…

view full answer...

Answer 5

Yes, you will be able to use the Rhino-Rack Universal Load Assist #RR-RUSL with the Rhino-Rack Heavy-Duty Roof Rack Crossbars and Yakima Bowdown J-bars on your Ford F-150 Supercrew. Do note that the support pole for the load assist maxes out at…

view full answer...

Answer 6

It's very difficult to answer that question, as the extension of the #RR-RUSL will depend on the length of the crossbars used on the vehicle. According to rhino rack, when extended fully, the bar will extend out past the end of the crossbar…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Will Rhino Rack Side Loader Load Assist Work with Thule Aeroblade Roof Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching