Length of Extension of Rhino-Rack RR-RUSL Universal Load Assist

Question

Question:

When installed, approximately how far does the bar extension go beyond the side of your vehicle?

asked by: Jim P

0

Expert Reply:

It's very difficult to answer that question, as the extension of the # RR-RUSL will depend on the length of the crossbars used on the vehicle. According to rhino rack, when extended fully, the bar will extend out past the end of the crossbar approximately 2-1/2 feet.

expert reply by: Mike L

0

Answer 1

Yes, the Rhino Rack Nautic Roof Kayak Carrier #RR571 will work great with Thule square crossbars as it was designed to fit that bar dimension.

view full answer...

Answer 2

There are a couple things that you can try for fitting the Rhino-Rack Universal Load Assist #RR-RUSL on your crossbars with the J-style carriers installed. The first would be to try some of the different clamp sizes, the load assist should have come…

view full answer...

Answer 3

Thanks for the feedback! The clamps that are the best fit are clamp 1 and 3. It doesn't matter which one you utilize as the top or bottom. You will have to take one foam pad off number 5 or 6 and put on either 1 or 3. The number 1 clamp you may…

view full answer...

Answer 4

The Rhino-Rack Universal Load Assist #RR-RUSL comes with several brackets that work with numerous brands of aftermarket crossbars but none specific to OEM crossbars. I am confident that at least one set of the included brackets could be modified to…

view full answer...

Answer 5

I do have an option for you but most load assists like the Rhino-Rack Universal Load Assist part #RR-RUSL won't work on factory roof racks as they require overhang which the flush systems don't have. Instead, I recommend the Yakima ShowBoat…

view full answer...

Answer 6

The Rhino-Rack Universal Load Assist #RR-RUSL comes with several clamps to fit various crossbars but Rhino-Rack does not call out any factory crossbars specifically. Basically you would compare the clamps in the picture I have included to the…

view full answer...

Answer 7

You can use the Rhino-Rack Universal Load Assist #RR-RUSL with most crossbars including your factory bars on your 2017 Nissan Rogue. They just wrap around your crossbars to mount into position. I've included a video for you to watch to see the…

view full answer...

Answer 8

The Rhino-Rack Universal Load Assist #RR-RUSL will fit properly on most larger roof rack crossbars. It is confirmed to fit on bars which measure as large as 3-1/8 wide and 1-7/8-inch tall so you can check your bars' thickness to confirm…

view full answer...

Answer 9

So what you will need to do is actually measure the crossbars on your 2021 Subaru Outback to determine a fit of the Rhino-Rack Universal Load Assist #RR-RUSL. The reason for that is this load assist is designed specifically for aftermarket crossbars…

view full answer...

Answer 10

Yes the Rhino Rack load assist part #RR-RUSL can be used with your Thule AeroBlade crossbars. It also would work with the other racks you mentioned as well.

view full answer...

Answer 11

Yes, you will be able to use the Rhino-Rack Universal Load Assist #RR-RUSL with the Rhino-Rack Heavy-Duty Roof Rack Crossbars and Yakima Bowdown J-bars on your Ford F-150 Supercrew. Do note that the support pole for the load assist maxes out at…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Length of Extension of Rhino-Rack RR-RUSL Universal Load Assist

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching