Reset Furrion Sound Bar

Question

Question:

Sound bar has no power. How can it be reset Camp trailer

asked by: Dave O

0

Expert Reply:

To reset your Furrion Sound Bar # FSB2N25MCBL, switch the unit to AUX IN mode and then press and hold MODE button for more than 6 seconds to make the unit return to factory default settings and re-instate the correct functions.

expert reply by: Michael R

0

Answer 1

In order to get your Furrion Sound Bar #FSB2N25MCBL back in working order it sounds like it needs to be reset. I've outlined the procedures for resetting this unit below: 1) switch the unit to AUX IN mode 2) press and hold MODE button for…

view full answer...

Answer 2

It sounds to me like you'll need to replace the remote with the Replacement Remote for Furrion RV Soundbar Item #FR88NR. There are no firmware updates for the Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL. Any features it has on it come as is…

view full answer...

Answer 3

The Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL uses RCA cables #DG52486PB to connect to the other electronics so you could have a bad cable or lose connection. I recommend first checking the cables to see if they are fully pushed on and that…

view full answer...

Answer 4

It sounds like you have already attempted the first step to resolving this issue with the a Furrion Soundbar #FSB2N25MCBL by trying switch the unit to AUX IN mode so as to select, press and hold MODE button for more than 6 seconds which should make…

view full answer...

Answer 5

Furrion RV Soundbar #FSB24SA2C-BL has standard inputs, left and right channels, for regular speaker wire. The other end of the speaker wire would have to be connected to a stereo or device that accepts regular speaker wire.

view full answer...

Answer 6

I contacted Furrion on your behalf. With the credit card style remote for the Furrion RV Sound bar w/ USB Charge #FSB2N25MCBL, there is a small push lever at the bottom right. Using your thumbnail or small flathead screwdriver you can pop the…

view full answer...

Answer 7

The way to reset the Furrion RV Soundbar w/ Bluetooth, #FSB2N25MCBL is to remove all power and then reconnect. It sounds like this is what you have been doing. Please note the linked operations manual below for connection and volume adjustment. You…

view full answer...

Answer 8

For your Furrion 2-Zone Soundbar #FSB2N25MCBL there is no reset button. You can unplug the soundbar from its power connection for 5 minutes and plug back in to reset it. If your controls still will not work I recommend contacting the service…

view full answer...

Answer 9

It sounds like you have already tried this. But just to make sure we have covered the bases, to reset the unit back to factory settings you will need to press and hold MODE button for more than 6 seconds. To remove the Furrion RV Soundbar w/…

view full answer...

Answer 10

While I wasn't able to get an exact cutout dimensional sheet from Furrion, I was able to find some dimensions that you can use to get an idea of what kind of cutout you need (see attached). The Furrion RV Sound bar w/ USB Charge #FSB2N25MCBL…

view full answer...

Answer 11

I reached out to Furrion for clarification and found that neither of the HDMI inputs on the Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL support ARC (Audio Return Channel). The only way for sound to work through this soundbar is with RCA. The HDMI…

view full answer...

Answer 12

I spoke with Furrion about the HDMI ports on the Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL, and they informed me that the HDMI ports on the sound bar are simply a pass through. One will need to be hooked up on the front and the back in order for…

view full answer...

Reset Furrion Sound Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching