How Does the Furrion RV Soundbar # FSB24SA2C-BL Hook Up to a TV or Stereo

Question

Question:

I have a 2017 Imagine 2800BH coach with a Furrion stereo that the TV sound will not play through the stereo speakers on the coach unless a dvd/cd is played. So, the sound bar is the next best option for the TV. The tv has very limited inputs zero outputs for much of nothing.... An HDMI input from a blu ray player only plays through the TV. How is the sound bar hooked up? Thanks

asked by: Brad M

0

Expert Reply:

Furrion RV Soundbar # FSB24SA2C-BL has standard inputs, left and right channels, for regular speaker wire. The other end of the speaker wire would have to be connected to a stereo or device that accepts regular speaker wire.

expert reply by: Michael H

0

Answer 1

More than likely you have the Furrion Vision S wireless camera system. We have 3 different monitors available depending on what size monitor you would like. -Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR…

view full answer...

Answer 2

I do have an option for you but the Furrion RV Soundbar part #FSB24SA2C-BL is a passive soundbar which means it would need a power source of its own therefore can't be attached directly to a TV. This passive soundbar would need to be hooked…

view full answer...

Answer 3

The attached PDF instructions show where to connect the audio and video cables from your TV to your sound bar. These can be made with JR Products #37247935 RCA cables. The sound bar is powered by 12V DC from your trailer and connected using the…

view full answer...

Answer 4

Since you have a Furrion Camera system with side cameras the only compatible monitors are going to be the 5" #FR97FR or 7" #FR47FR options.

view full answer...

Answer 5

You will need to provide a 12 volt power source for the Furrion #FSB2N25MCBL soundbar. The sound bar includes a harness that plugs into the rear of the speaker. The harness terminates in 6 bare wires, 4 wires for speakers, one for ground and a…

view full answer...

Answer 6

It's possible you could take it to get repaired but it may be cheaper to upgrade your unit. The Jensen RV Stereo #JWM60A is identical to your Jensen AWM968L, and has the same cutout dimensions as your current unit, making this a direct…

view full answer...

Answer 7

The way to reset the Furrion RV Soundbar w/ Bluetooth, #FSB2N25MCBL is to remove all power and then reconnect. It sounds like this is what you have been doing. Please note the linked operations manual below for connection and volume adjustment. You…

view full answer...

Answer 8

To reset your Furrion Sound Bar #FSB2N25MCBL, switch the unit to AUX IN mode and then press and hold MODE button for more than 6 seconds to make the unit return to factory default settings and re-instate the correct functions.

view full answer...

Answer 9

The Furrion Indoor RV Soundbar - Surface Mount - 29-3/4" Wide x 3-7/8" Tall - 40 Watts - Black #FSB24SA2C-BL does have mounts for a wall that are sturdy enough for the TV mount you are referencing. I attached a photo to assist as…

view full answer...

Answer 10

Sound bar speakers and TVs are not brand-specific but the particular one you want to use needs to have connectors to match your TV set so you can hook it up easily. Some soundbars like #FSB24SA2C-BL and #FSBN4WBL are passive, meaning they do not…

view full answer...

Answer 11

The Furrion Soundbar part #FSB24SA2C-BL is a passive speaker which means you'd need to run an amp to it with signal ran from your television. That means that you'd need the remote to either control it via the television or by…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How Does the Furrion RV Soundbar # FSB24SA2C-BL Hook Up to a TV or Stereo

Product Page this Question was Asked From

Continue Researching