Is There Trimming Required to Install Draw Tite Hitch DT79MR

Question

Question:

Have read several reviews. Does seem to be a question if trimming is required on this hitch. Will be installing on 2021 Honda CRV. Thank-you

asked by: David L

0

Expert Reply:

When installing the Draw Tite hitch part # DT79MR there is trimming required of the rear fascia to allow the hitch opening to pass through.

If you watch the install video I attached you can see the trimming outlined.

expert reply by: Jameson C

0

Answer 1

I checked with Draw-Tite and they list the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR as a fit for a 2023 Honda CR-V all models so you will be good to go with a Sport Touring. I took a look at some of the review and there were instances…

view full answer...

Answer 2

I'd be happy to help with that. I'd recommend the Curt Class III hitch that you'd looked at, part #C13397. Curt and Honda both state that there isn't a hitch fit for the 2021 CR-V Hybrid model, but if you look at the product reviews…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver part #e98848 is a fit for a 2023 Honda CR-V Hybrid AWD Sport and it's what I recommend using. I know this may be a surprise but hybrid models typically have the same rear sub-frame as the non hybrid models so…

view full answer...

Answer 4

Your 2018 Honda CR-V does have the connector needed to install the Curt trailer wiring harness part #C56370 but due to the location of where the harness is its most likely buried behind other harnesses in that area. You'll want to keep digging…

view full answer...

Answer 5

For Curt trailer hitch #C13397 it is recommended to remove the lower fascia if your 2017 Honda CR-V has the hands-free liftgate option so that it and the sensor bracket can be trimmed. Regardless though removing the fascia or at least loosening it…

view full answer...

Answer 6

We have checked with the manufacturer on this in the past. We have confirmed that the Draw-Tite class 3 hitch #DT79MR will fit the 2024 Honda CR-V hybrid. This is a class 3 hitch with a 2" receiver. We have also confirmed fitment with several of…

view full answer...

Answer 7

We had a customer with a 2017 Honda CR-V Touring just like yours who told us that the Curt hitch part #C13397 did not interfere with their hands free liftgate at all. You would not need to move any sensors.

view full answer...

Answer 8

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 9

The Curt Hitch part #C13397 is also a fit for your 2022 Honda CR-V and is a very similar to design to the EcoHitch that fits your vehicle #306-X7345 with same weight capacity but at a better price point. This would work great with a bike rack like…

view full answer...

Answer 10

Our fitguide can be a bit confusing but the Curt hitch part #C13397 DOES fit the hybrid models of the 2020 Honda CR-V like yours. We have it listed twice in the fitguide results as a fit for the Hybrid models and a fit for the non-hybrid models which…

view full answer...

Answer 11

We have some hitch options that are compatible with the Hands Free Tailgate feature on your 2019 Honda CR-V. That being said, the Hands-free Liftgate sensor areas may be limited to areas away from the center where hitch receiver opening is located.…

view full answer...

Answer 12

I checked with the manufacturer and the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR is a confirmed fit for a 2023 Honda CR-V Hybrid. It offers a bolt-on fit with no drilling required. It has a 2" receiver that can be used for towing…

view full answer...

Is There Trimming Required to Install Draw Tite Hitch DT79MR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching