bing tracking image
Q & A Icon

Audio Troubleshooting On The Furrion Observation Camera System  

Question:

I have a Furrion vision S observation system. I hooked everything up and the camera visual works great but there is absolutely no audio. Do you have any ideas to resolve this problem? Thanks!

0

Expert Reply:

To adjust the volume on your # FOS43TASF you will enter the menu on the display. From there just below pairing is setup. Select setup and the third option down is the volume. Select it and adjust to your preferences. If it's not that you could have a powering/signal issue which can be corrected with # FR87PR or # VGR64VR.

If you still have issues getting the audio working you can try unpairing and repairing your camera system.

In order to un-pair the camera on your Furrion RV Observation System and assign it to the correct designation you will first just need to press the button at the bottom of the camera itself and hold it down for 15 seconds. This will un-pair the unit.

Once this is done you will just follow the original pairing steps again as outlined in the instructions manual (and also attached below) to set it as the rear camera.

If after all of this you still can't get the audio to work then you may just have a bad unit and will need to contact Furrion if you're still under warranty to replace the unit.

expert reply by:
0
Kevin C
Furrion Camera Manual
Furrion Camera Manual
(click to enlarge)
Furrion Camera Manual
Furrion Camera Manual
(click to enlarge)

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>