Replacement Tarp for Truxedo Lo Pro QT for 2009 Toyota Tacoma 6 ft Bed

Question

Question:

Hi, does this cover fits 2009 tacoma 6inch bed?

asked by: HENRY B

0

Expert Reply:

The replacement tarp part # TX1117750 is the correct replacement tarp for a Lo Pro Tonneau for a 2009 Toyota Tacoma with a 6 foot bed since this tarp fits the part # TX556901 which fits your truck.

expert reply by: Jameson C

0

Answer 1

We carry so many varients of tonneau covers for the different vehicles. The options we carry for your 2005 Toyota Tacoma would be the TruXport, Lo Pro or the Deuce 2. Of those three, we have one replacement tarp and that is the replacement tarp for…

view full answer...

Answer 2

The Replacement Tarp for TruXedo Lo Pro Roll-up Tonneau Cover #TX1117750 is the correct replacement tarp if the cover on your 2011 Toyota Tacoma is the 556801 cover. There is also the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover…

view full answer...

Answer 3

I went ahead and did some research, and I discovered that the replacement tarp depends on what model of TruXedo cover you have on your 2008 Toyota Tacoma's 5-Foot Bed. From my research, it is possible that you have one of three different covers.…

view full answer...

Answer 4

Yes, the TruXedo Lo Pro and TruXedo Lo Pro QT are essentially the same cover. TruXedo changed the logo and the name of the cover to update it. Since you were looking at replacement tarps, the correct replacement tarp for your 2011 Toyota Tacoma with…

view full answer...

Answer 5

The best method to identify the tonneau cover on your 2008 GMC Sierra will be to look for the date code and or serial number. The serial number is located on the driver's side of the front header on the TruXport frame. The date code is printed on…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Replacement Tarp for Truxedo Lo Pro QT for 2009 Toyota Tacoma 6 ft Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching