Will This Retrax Tonneau Cover Work With An Adarac Ladder Rack?

Question

Question:

Hello, I have a 2010 Tundra 6.5 foot bed. Can I use this retrax system with an adarac?

asked by: Jeff A

0

Expert Reply:

The RetraxONE MX Hard Tonneau Cover # RT60846 will fit your 2010 Toyota Tundra and will fit a number of ladder racks. Since it is an inside the rail tonneau cover, this Adarac Ladder Rack # A4001671 will work as it is designed for that kind of cover. These will both fir your 2010 Toyota Tundra with a 6-1/2 Foot Bed.

expert reply by: Adam E

0

Answer 1

Yes, the Adarac Pro Series Custom Ladder Rack #A32BJ is compatible with the RetraxONE MX Hard Tonneau Cover RT60386 on your 2017 Ford F-250 Super Duty (6-3/4 Ft. Bed). If you need tie-downs and mounting points for your ladder rack, I recommend the…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Rhino Rack and Thule have roof racks with lower bars that can fit the XR tracks but only Yakima has an actual ladder rack with the Yakima OverHaul HD Adjustable Truck Rack w/ Retrax XR Tonneau Cover Adapter #Y01151-5855 for your application which is…

view full answer...

Answer 4

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top opening…

view full answer...

Answer 5

A tonneau cover like the Retrax PRO XR with Trax Rails #RTT-80245 sits on top of the bed rails of your 2019 Ram 1500. This tonneau has T-slots that sit on the outer part of the Trax rails, which is what the Yakima Overhaul HD with 58" long bars…

view full answer...

Answer 6

You may be able to use the Darby Extend-A-Truck Kayak Carrier, #DTA944-968-924, to carry both kayaks at once, but you will want to make sure that the kayaks will fit on the crossbars of this system. The hitch mounted extension has a 48 inch wide…

view full answer...

Answer 7

I do have a ladder rack that will fit on your RetraxPRO Tonneau Cover #RTT-80373 but the Thule SR Ladder Rack will not fit. You can get the Yakima OverHaul HD #Y01151-5855 that will mount to your tonneau cover! In my opinion this is a better ladder…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Will This Retrax Tonneau Cover Work With An Adarac Ladder Rack?

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching