Which Heavy Duty RAS Enhancement Kit Fits A 2016 Ford F-150 4WD?

Question

Question:

what part number is required for 2016 Ford f150 4WD heavy duty roadmaster active suspension?

asked by: Thomas E

0

Expert Reply:

For your 2016 Ford F-150 4WD the correct Heavy Duty RoadActive Suspension System is the # RAS3611-YHD.

The # RAS3611-YHD has a 3000lb load rating to prevent sag when towing a trailer or carrying a heavy payload, and does an awesome job of preventing sway and body roll when your truck is loaded or unloaded.

I included a video of the # RAS3611-YHD for you to take a look at.

expert reply by: Samuel C

0

Answer 1

For suspension enhancement on your 2022 Ford F-150, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD. The RoadActive leaf spring enhancement is a better choice than air bags because the leaf spring…

view full answer...

Answer 2

Yes, we have an application that will work with your 2019 Ford F-150 with 5.5' bed and Lippert Turning Point Pin Box. With that set-up you are going to need to use a fixed hitch. I recommend the Reese M5 5th Wheel Trailer Hitch #RP30928.…

view full answer...

Answer 3

In order to install the Curt A16 5th Wheel Trailer Hitch part #C16120 you'll need to position the base rails 22" apart on center. That is the distance between the center of the legs front to back. I have attached a photo with the…

view full answer...

Answer 4

Yes, you can use the RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS3611-YHD with a weight distribution system on a Ford F-150. The spring bar tension won't be as high with the RAS as it woud be without but aside from that…

view full answer...

Answer 5

What we've found is that the HD version of the RAS systems are the way to go. They provide the best support, stability, and ride quality, and since they are adjustable you don't have to worry about them being overly harsh. For as much sag as…

view full answer...

Answer 6

The absolute best suspension enhancement for your 2017 Ford F-150 4x4 is the RoadActive Suspension kit part #RAS3611-YHD. The reason I recommend this kit is because it's adjustable with how much support you can add, easy to install, but mainly…

view full answer...

Answer 7

When it comes to installing an active suspension kit on your 2016 Ford F-150 The RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD will help better getting rid of the squat on your vehicle. This system has a 3,000…

view full answer...

Answer 8

I checked with RoadActive and when installing the #RAS3611-YHD the bolt hole to use on the lower bracket that fits under the spring is the second one from the very end.

view full answer...

Answer 9

To reduce the sag you are experiencing with your 2016 Ford F-150 when you have the truck bed loaded you would want to use the Timbren kit part #TFR1504E that you referenced. This will provide you with the suspension support you are looking for and…

view full answer...

Answer 10

The biggest causes of persistent trailer sway are improper trailer loading where there isn't enough tongue weight relative to total trailer weight (it needs to be 10-15 percent of total weight) and/or the trailer not sitting level when towing. If…

view full answer...

Answer 11

There should be clearance when using the Timbren Rear Suspension Enhancement System #TFR1504E without load in the truck on your 2016 Ford F-150. I recommend removing the spacer. The empty ride of your vehicle is not to be effected by the system…

view full answer...

Answer 12

Yes, for your 2018 Ford F-150 a Timbren like the part #TFR1504E (which is a custom fit for your truck), is exactly what you need. This will give you the rear suspension support you need to greatly reduce sag when you have your truck bed loaded or if…

view full answer...

Which Heavy Duty RAS Enhancement Kit Fits A 2016 Ford F-150 4WD?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching