Does the Replacement Hardware Kit for Explorer Roof Boxes Come with a Seal Included

Question

Question:

Do you have a replacement seal kit?

asked by: Bryan W

0

Expert Reply:

The SportRack Replacement Hardware Kit for Explorer and SkyLine XL Roof Mounted Cargo Boxes # SR05587 is designed to work with Karrite Explorer boxes and does come with some weather strip seals included. If you just need the seal, you can source that part locally as it's not a replacement part we offer, but any flat seal with adhesive on one side would work well.

expert reply by: Erik B

0

Answer 1

You are correct, the Karrite Explorer and Sportrack Explorer are the same cargo box. We do offer a few individual replacement parts for this product like the Replacement Latch #03347 referenced in your question. I recommend the SportRack Replacement…

view full answer...

Answer 2

The correct replacement hardware kit for your Sear X-Cargo box model 28-7271 is part #SR05587 on our site. We have confirmed with Thule that this works for your exact model.

view full answer...

Answer 3

For your Karrite Explorer, we do not have just the u-bolt and plastic nut replacements. We do have the Replacement Hardware Kit #SR05587 which will fit your roof box so that is my recommendation. This is a full kit but it is nice to have spare parts…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Does the Replacement Hardware Kit for Explorer Roof Boxes Come with a Seal Included

Product Page this Question was Asked From

Continue Researching