Solera Slide Topper Hardware Included

Question

Question:

Do the Solera slide toppers come with the brackets that fit the new campers that are factory prepped for Solera toppers, the brackets slide in and locked in place with set screws.

asked by: John V

1

Helpful Expert Reply:

Slide toppers like the # LCV000165061 all come with the mounting brackets included. If you look at the included pictures you can see how the brackets slide in to each other and get locked in with screws just like you were saying for the factory prepped brackets. Since your camper already came factory prepped for solera toppers you'll be able to install the toppers in less time.

expert reply by: Kevin C

1

Solera Brackets
(click to enlarge)

Answer 1

The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the…

view full answer...

Answer 2

The size of the brackets of the Solera RV Slide-Out Awning #LCV000182037 is 1.05" from the bottom of the bracket to the top of the rivet hole. With 2-3/4" of space from the top of the vent to the top of the slide you will have more than…

view full answer...

Answer 3

I have linked the photo I believe you are speaking of. The bracket on the Solera RV Slide-Out Awning part #LCV000182037 is right at 2" which should allow you to mount it in the space you have. We have always used the supplied fasteners which are…

view full answer...

Answer 4

If the outside flange to outside flange measurement of your slide measures 155 inches, I'd recommend the Lippert Solara #LCV000163300 for white or #LCV000168109 for black. These are recommended for slides that have a 152-157 inch flange to flange…

view full answer...

Answer 5

I believe what you are asking is how far out from the slide-out does the roller sit. From where the bracket mounts to the slider to the middle of the roller is about 3" as you can see in the attached photo. If you are needing a different…

view full answer...

Answer 6

I attached an install video that will walk you through the entire process of installing a slide topper like the Solera part #LCV000165061 that you referenced. If you need help picking out a slide topper get me the width of the box including the…

view full answer...

Answer 7

For a 138-1/2" flange to flange measurement I recommend the Solera RV Slide-Out Awning - 139" Wide - Black #LCV000168328. This will have approximately 2-3/4" of overhang past the slide out so you'll want to make sure that…

view full answer...

Solera Slide Topper Hardware Included

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching