What Length of Bed Does Truxedo Pro X15 # TX1469101-CVR Fit

Question

Question:

Did no ask me size of my truck bed? This is a replacement cover

asked by: David N

0

Expert Reply:

The replacement Truxedo Pro X15 tonneau cover tarp part # TX1469101-CVR fits truck beds that are 6-3/4 feet in length.

expert reply by: Jameson C

0

Answer 1

The TruXedo Pro X15 Soft Tonneau Cover #TX1479601 is the Pro X15 that fits your 2018 Ford F-350 with 8' bed. That cover will use Replacement Tarp for TruXedo Pro X15 Soft Tonneau Cover #TX1479601-CVR as the correct replacement tarp.

view full answer...

Answer 2

To get the clearance you need to tow your 102 inch wide 1996 Gulf Stream Kingsley 5th wheel trailer a replacement pin box will not offer enough extension. Basically the distance from the back of the truck cab to the center of the king pin when the…

view full answer...

Answer 3

The best pin box hitch setup for a short bed truck is a Sidewinder pin box and a stationary hitch. This gives you the clearance you need to make tight turns without requiring you to get out of the truck and operate a slider when you get to a parking…

view full answer...

Answer 4

The overall dimensions of the TruXedo TonneauMate Truck Bed Toolbox part #TX1117416 are 55-1/2" long x 22-1/4" wide x 14" tall. The inside dimensions of the toolbox are 43" long x 14-1/2" wide x 13" tall. I understand…

view full answer...

Answer 5

A truck toolbox such as the UWS Truck Bed Toolbox - 5th Wheel Series Chest #UWS01066 will allow the lid to open somewhat, but not entirely if you have a tonneau cover like the TruXedo Pro X15 Soft Tonneau Cover - Roll Up #TX1472001 on your 2016 GMC…

view full answer...

Answer 6

Check out the DeeZee Red Label Truck Bed Toolbox #DZ8546. This has been confirmed to fit your 2014 Chevy Silverado 1500 with a 6-1/2 foot bed and should fit well under your tonneau cover. I attached a picture that a customer sent us that shows his…

view full answer...

Answer 7

For your 2022 GMC Sierra 3500 6-3/4 foot bed Truxedo has the X15 part #TX97FR which was designed to work with the MultiPro tailgate.

view full answer...

Answer 8

I spoke with a representative from Access. According to them, they do not offer a tonneau cover that is compatible with a low-profile toolbox. If your tool box is something like the TruXedo TonneauMate Truck Bed Toolbox - Crossover Style - Poly Tub…

view full answer...

Answer 9

The correct Truxedo Pro X15 that fits your 2020 Chevy Silverado 1500 with a 6.5 ft bed is the part #TX1472601.

view full answer...

Answer 10

The side rails that attach the TruXedo Pro X15 Soft Tonneau Cover part #TX1446901 for 6-1/2' beds or part #TX1448901 for 8' beds to the bed rails on your 2017 Ram 3500 will stick out 3" from each side. Therefore, the TruXedo Pro X15 will…

view full answer...

Answer 11

If you're needing a tonneau cover that sits inside the bed rails of your 2021 Ram 3500 6-1/2' bed then you'll want to check out the TruXedo Pro X15 #TX1446901. This is a solid choice for a soft cover and it has a matte black finish that…

view full answer...

Answer 12

Since the UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box - 10.4 cu ft #UWS01032 is a wedge-style tool box, the only relevant dimension to determine the compatibility with a roll-up cover is the height of the tool box. Without knowing…

view full answer...

What Length of Bed Does Truxedo Pro X15 # TX1469101-CVR Fit

Product Page this Question was Asked From

Continue Researching