How To Fix Ball Mount Hitting Ground When Towing Trailer W/ 2020 Nissan Pathfinder
Question:
My vehicle and tow 6000 and my pop up is only 2,200 but i only have about 6inch of clearance when i am doing light off-road driving and i tend to scape the bottom of the ball hitch. Will these lift the vehicle and provide more clearance? Any idea about how much more clearance?
asked by: Tony R
Expert Reply:
The Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle # CSS-1195R you were looking at for your 2020 Nissan Pathfinder are not going to lift the vehicle much if at all, and will only help prevent sagging when the trailer is connected.
To get increased ground clearance the best option would be to raise your pop-up camper using an over-under kit which moves the axles from on top of the leaf springs to underneath. This raises the trailer by the diameter of the axle plus the height of the leaf spring stack.
If your trailer has a 2-3/8" diameter axle you will need the # K71-384-00, or if your 3" diameter axles you will need the # K71-385-00.
With the trailer lifted you will be able to use a ball mount with less drop, which will give you the additional ground clearance you are looking for.
To determine the correct ball mount you will need to measure your trailer hitch receiver and trailer coupler as shown in the included help article.
Once you have determine how much rise/drop you need you can look through the included link of out ball mounts, or if you can tell me the amount you need I would be happy to recommend the correct ball mount for you.
I included videos for each of the products mentioned for you to take a look at.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Standard Duty
- SuperSprings Intl
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Do the Coil SumoSprings for a 2020 Mercedes-Benz Metris Provide Lift & Reduce Squat
- Q&A: SumoSprings Helper Springs For a 2023 Toyota Highlander Limited Platinum
- Q&A: How Much Space Should I Have Between the SumoSprings and Axle on a 2012-2023 Jeep Wrangler?
- Q&A: Coil SumoSprings Kit that Fits 2021 Toyota Highlander 2WD
- Article: Most Popular Wheel Bearings
- Q&A: Will Installing the Coil SumoSprings # CSS-1195R Affect Warranty on a 2016-2017 Mercedes-Benz Metris
- Q&A: Does the Air Lift Air Shock Controller Compressor System Have a Minimum Pressure Setting?
- Q&A: Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Where to Position the Trailer Axle?