Correct Bearing Kit for Tracker Marine Pontoon Trailer
Question:
I have a 1989 Bass Buggy trailer that has the 5x5.5 hubs. When changing the tires I discovered my bearings need replaced. After pulling the hub I noticed that bearings do not have any markings to indicate the bearing size and only the grease seal has a marking 10-19. Do you know off hand which bearings I need to order? I took some micrometer measurements and they are roughly as follows: Inner Bearing ID 1.375 Outer Bearing ID 1.06 Grease Seal ID 1.719 Grease Seal OD 2.56 Im thinking L68149 & L44649 Bearings, and a 171255TB 10-19 Seal, but Im guessing based off the measurements.
asked by: RJ J
Helpful Expert Reply:
It sounds like you need the Bearing Kit for #84 Spindle part # BK2-100. This would be the correct bearing kit for the trailer with listed dimensions.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Are Bearings L44549 and L44649 Interchangeable