Correct Air Lift Compressor and Air Bags for a 2015 Ram 3500

Question

Question:

Will this kit work on a 3500 dually 2015 ram.

asked by: Bruce J

0

Expert Reply:

Yes, the Air Lift Load Controller Compressor System for Air Helper Springs part # AL25856 will work great on a 2015 Ram 3500. If you don't already have a set of airbags picked out, I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs part # AL57595 which are the heavier duty model.

expert reply by: Conner L

0

Answer 1

There seems to be a bit of confusion here, which I'll try to clear up. There are 3 main capacities related to the weight your vehicle can handle that you generally want to know; your payload (cargo) capacity and towing capacity are going to be…

view full answer...

Answer 2

I spoke with my contact at Air Lift about kit #AL57295 on your 2014 Ram 3500. He stated that what you are experiencing is normal. What I recommend is getting the truck loaded up and the trailer coupled and then adding however much air is needed to…

view full answer...

Answer 3

The SumoSprings Solo Custom Helper Springs item #SS28UV would be a great option for support on your 2022 F-150. These have a 1,500 lbs capacity and fit both the 2WD and 4WD models. I really like SumoSprings over other suspension options because of…

view full answer...

Answer 4

According to the linked installation instructions, the pink wire you describe is for an optional feature that will allow the #AL74000 WirelessONE compressor system to make adjustments as soon as the ignition is turned on. Otherwise, the system will…

view full answer...

Answer 5

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...