Can the Hollywood Racks Destination Handle Heavy E-Bikes

Question

Question:

Are they any issues with carrying E-Bikes that weight about 45 -50 lbs on this rack?

asked by: Scott A

0

Expert Reply:

I have a solution for you.

First, though, the Hollywood Racks Destination, part # HR4000, does not support bikes over 35 pounds.

For your heavier e-bikes, I recommend the Hollywood Racks Sport Rider SE, part # HR1400Z. It can handle 4 bikes up to 50 pounds each.

I've linked to a video review of this rack for you to look at.

expert reply by: Kef G

0

Answer 1

The Kuat NV 2.0 #BA22B you referenced is a fantastic bike rack, but since you have electric bikes with fenders you will need to go a different direction. The reason is the NV 2.0 is a wheel-mounted bike rack and the clamps will not mount to the…

view full answer...

Answer 2

The majority of bike racks are actually designed for full-size adult bikes so unless you have features such as fat tires, fenders, or the lack of a horizontal cross tube for example then you should not have issues. That said, the Hollywood Racks…

view full answer...

Answer 3

I have a possible solution for you, but the Replacement Wheel Strap Assembly #HR27FR is the only wheel strap for the Hollywood Racks Destination bike rack #HR4000 and #HLY94FR and it is only designed to be used with up to 3" wide tires. And if…

view full answer...

Answer 4

Equal-I-zer uses a 3/4 inch brass washer. We sell the washers along with the spacer rivet as part #EQ95-01-9450. I'd recommend sticking with brass washers if at all possible.

view full answer...

Answer 5

The Curt Weight Distribution Shank #17120 that you referenced will work perfectly with the Replacement Head for Equal-i-zer Weight Distribution Systems #EQ90-02-1000 and the Curt 2" Hitch Ball #A-90 to essentially give you a 10K adjustable ball…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Can the Hollywood Racks Destination Handle Heavy E-Bikes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching