Replacement Wheel Bearings for a 1980's Coachman Travel Trailer
Question:
I have a 1980s era coachmen TT. -It measures approx 17foot from tongue to bumper -It is dual axle. -the tires are 175-80R13 LR C -I have measured the axle diameter at approx 2.25 Q1: What is a ballpark estimate weight of this model? I am figuring 2500# Q2: I am looking to replace wheel bearings. Do i need to pull one out to verify size and assembly configuration? THank you!
asked by: Eric K
Expert Reply:
It sounds based on the size of your axle that you likely to have 3,500lb axles.
The kit most likely to fit your Coachmen Travel Trailer is the Bearing Kit # BK2-100. You will want to remove one of your hubs to verify this is correct. I included a picture to indicate where to check your measurements.
Inner Bearing # L68149
ID-1.378"
Inner Race # L68111
OD-2.361"
Outer Bearing # L44649
ID-1.063"
Outer Race # L44610
OD-1.980"
Grease Seal # RG06-050
ID-1.719"
OD-2.565"
If you find that your measurements or bearings are different then please let me know what you have and I will help you find the correct bearings.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - L44649
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle