Availability of Brake Flange Used on TRU74FR Spindle
Question:
is just the brake mounting flange available for this axle?
asked by: Michael B
0
Expert Reply:
For a 1-3/4 inch spindle stub such as what would be found on a 2000 lb axle, you'd use # 4-34.
expert reply by:
Mike L
0
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacing Spindle of Dexter 3,500 lb Axle Due to Wear
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer