Fan-Tastic Roof Vent Replacement Motor

Question

Question:

I am trying to locate the part number for Fan-Tastic motor and fan assembly for original Fan. Model FV3301LWUSD81 Item 810297 SKU 9108870893 Product 958676402 Production date 01/2016

asked by: Jason C

0

Expert Reply:

You'd need the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans # FVK8017-00 that you referenced.

expert reply by: Jameson C

0

Answer 1

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 2

The middle section of the Guardian Rock Guard is 37-1/2 inches wide and 26-7/8 inches tall. The two side panels are smaller at the top than they are on the bottom. The top, in width, is 15-1/2 inches but at the bottom is 18-1/8 inches. They are both…

view full answer...

Answer 3

Even with the rear axle of your motorhome being a decent distance from the rear of it there will still be rocks and other debris that will fly up from the wheels and potentially hit your vehicle. The Rock Guard part #RM-4000 will definitely help.…

view full answer...

Answer 4

You can use part #FVK8017-00 to replace the bow-tie bracket, motor, and fan blade for your Fan-Tastic Vent 4000-series roof vent.

view full answer...

Answer 5

To protect your 2017 Jeep Wrangler while it's being flat towed behind an RV I recommend taking a look at the Roadmaster Tow Defender #RM-4750. This heavy-duty nylon screen will do a great job of deflecting rocks, gravel, and road debris down and…

view full answer...

Answer 6

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 7

It would be time to replace the motor of your Fan-Tastic roof vent LF8000 and for that you'd want the part #FVK8017-00.

view full answer...

Answer 8

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part #FVK8017-00 is the correct replacement fan/motor for your Fan-Tastic Vent Create-A-Breeze Model 8000.

view full answer...

Answer 9

Yes it is very possible that the fan motor of your Fan-Tastic roof vent is bad and needs to be replaced. For that we have the part #FVK8017-00 which would get your vent back working again.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Fan-Tastic Roof Vent Replacement Motor

Product Page this Question was Asked From

Continue Researching