Installation of Reverse Lockout Solenoid Kit for Demco DA66B Actuator DM5836
Question:
I need the instructions for Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass. Non were shipped with and link provided to manufacturer does not work.
asked by: Mat
Expert Reply:
I reached out to Demco, who said they don't have an installation manual for the Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass # DM5836.
They said the reason for that was it was just a few steps, though they did detail the process, as follows:
"All that is required is to take out the two bolts in the back that hold the master cylinder in place, and mount the solenoid cover to that location using the same bolts. To place the inline solenoid on the back side of the master cylinder, disconnect the brake line and take that brass fitting off the master cylinder. Then thread the inline solenoid to the back side of the master cylinder, and re-connect the brake line to the back side of the solenoid. One of the wires on the solenoid will need to be grounded, and the other will need to connect to the reverse power source."
Product Page this Question was Asked From
Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Tandem Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: Reverse Lockout Solenoid Kit for Demco DA66B Hydraulic Brake Actuators - Non-Bypass
- Shop: Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Video: Review of Dexter Brake Actuator - Replacement Inner Slide - DX99FR
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Q&A: Does The Replacement Inner Member For Dexter Actuator Include New Rollers And Pins?
- Shop: Replacement Solenoid Adapter Fitting for Dexter Model 10 Brake Actuators Made Before 2010
- Shop: Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
- Shop: Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators - Non-Bypass
- Q&A: Troubleshooting Trailer Reverse Lock Out Solenoid that Doesn't Work
- Q&A: How To Confirm Fit of Replacement Inner Member for Dexter DX7.5L Actuator
- Q&A: Installation of Electric Reverse Lockout Solenoid for Surge Brakes
- Q&A: 2015 Ranger Boats z520c Replacement Coupler/Actuator
- Q&A: Recommended Surge Brake Actuator For Discontinued Atwood 85739
- Q&A: Intermitent Backing Problems with a Suge Coupler
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM72VR
- Search Results: 68149
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: Demco Hydraulic Brake Actuator Review
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Search Results: 25580
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: dust cap
- Video: Lippert Center Point Trailair Air-Ride Suspension Upgrade Review
- Shop: Suspension Enhancement
on Accessories and Parts
