Wiring Instructions and Diagram for the LED Amber Quad Flash Kit for Trucks and Trailers

Question

Question:

Do you have a wiring diagram you could email me for your led warning light kit part #CPL65A-STR?? Plus what the warranty on the LEDs??

asked by: Craig

0

Expert Reply:

I pulled one of the units off the shelf in our warehouse and I have copied the directions that are included in the package for you. I called my contact at the manufacturer and the LEDs have a lifetime manufacturer warranty.

Instructions:
Your light kit includes 2 lights, 2 grommets and 2 plugs.
The first light is called a master (master is imprinted on back of light); the second light is called the slave (SLV is imprinted on back of light)

First, install the master light on one side of vehicle and wire the white wire to a ground.

Next, wire the red wire to your switched power source (12 volts).

Then, install the SLV (slave) light on the other side of the vehicle and wire the white wire to a ground.

Wire the red wire from the slave light to the black wire on the master light.

The black wire on slave is not used

I have posted a photo of these lights with wiring for you to view also.

expert reply by: Patrick B

0

click to enlarge

Answer 1

Your spare tire carrier is going to depend on a few things, including your wheel bolt pattern, your tire size, your trailer frame width, and whether or not you want the carrier to provide a rise. We offer several options that fit a variety of…

view full answer...

Answer 2

I do have alternate flashing lights for you but the LED Amber Quad Flash Kit for Trucks and Trailers part #CPL65A-STR are only function 1 lights. For a similar light with alternate flashing capabilities, I recommend using a function 1 light like…

view full answer...

Answer 3

From the top of the coupler to the centerline of the mounting bolt holes for the Channel Tongue Trailer Coupler #CT-3001-Z measures 1-3/8" and then from center of mounting hole to center of mounting hole measures 3-1/16". Attached is a…

view full answer...

Answer 4

Yes, we have round LED strobe lights available that are similar to the LED Amber Quad Flash Kit, part #CPL65A-STR. For round LED strobe lights, we have the Optronics Triple Flash LED Warning Light, part #SLL43AB1, and the Optronics Triple Flash LED…

view full answer...

Answer 5

The Titan electric over hydraulic brake actuators including #T4813102 take 0.3 seconds to get to 200 psi and 1.1 seconds to get to 90 percent of their full rated pressure which would be 1,350 psi for the BrakeRite EHB #T4813102. This is about as fast…

view full answer...

Answer 6

For your 2013 DRV Estate fifth-wheel trailer, it really depends on whether your 17.5 inch diameter wheels are a 8 on 275mm bolt pattern or a 8 on 6-1/2 bolt pattern. If you have an 8 on 275mm pattern, the only one we carry is the Taskmaster Steel…

view full answer...

Answer 7

Yes, you can upgrade from a 16" rim to a 17-1/2" rim if you have the clearance in your fenders and the right size studs. I recommend the Americana Modular Wheel w/ -0.5 Offset item #AM22461. This is a 17-1/2" x 6-3/4" rim with an…

view full answer...

Answer 8

I have a solution, but, the Air Lift Air Shock Controller Compressor System, #AL25804, that you referenced is designed to only work with air shocks not air bags. On an air bag helper spring system, I recommend the Firestone Air Command I Compressor…

view full answer...

Answer 9

We do have standard pedestal mount amber lights available, such as the Optronics #ST52AA, but if you are connecting the lights directly to your tractor's battery, they will not blink like hazard lights. They will simply provide a constant light…

view full answer...

Wiring Instructions and Diagram for the LED Amber Quad Flash Kit for Trucks and Trailers

Product Page this Question was Asked From

Continue Researching