Roadmaster Direct-Connect Base Plate Kit Bolt Torque Requirements

Question

Question:

What is the torque value for long bolt on 2021 ram base plate install

asked by: Mike M

0

Expert Reply:

Please see the attached chart for all bolt torque requirements on the Roadmaster Direct-Connect Base Plate Kit with removable arms, # RM-522203-5, for your 2020 Ram 1500.

Note the attached link to installation video.

expert reply by: Michael R

0

Torque Value
(click to enlarge)

Answer 1

There is only one way to tell if they can be used together. Check the mounting location of your front hitch where it attaches to the frame of your jeep. I was unable to find your purchase of the Draw-Tite hitch in our system but the Draw-Tite Hitch…

view full answer...

Answer 2

All of the torque specs for the Roadmaster EZ Base Plates #523163-1 for your 2012 GMC Terrain are listed in the instructions which I've linked for you on this page.

view full answer...

Answer 3

The self-lubricating nylon bushings on the Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522 are already installed so it is not something you will have to do yourself. As for the actual torque specs for the Roadmaster Direct-Connect Base…

view full answer...

Answer 4

According to Roadmaster the brake light switch on your 2022 Ford Escape will be a purple/white wire. Here is the wiring layout for the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400: Normally closed application (applies to most…

view full answer...

Answer 5

The brake light switch wire is a single wire that is white and purple. It will be located towards the top of your brake pedal assembly so you may need to remove a portion of the dash to access this wire.

view full answer...

Answer 6

The purple/white brake light switch wire is going to be located under inside the dash above the brake pedal. This will require you to remove portions of the dash to gain access and install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Roadmaster Direct-Connect Base Plate Kit Bolt Torque Requirements

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching