Is Item # 325-GH-8040 Compatible With A 2021 Highland Ridge Roamer 354 MBH

Question

Question:

Will this pin box fit my 2021 Highland Ridge Roamer 354 MBH 5th wheel without adaptors? I have a BandW Companion Slider 5th wheel hitch.

asked by: Tim

0

Expert Reply:

The 2021 Highland Ridge Roamer 354 MBH comes with the Lippert 1621 or 1621HD pin box. Item # 325-GH-8040 is compatible and would not require any additional adapters to install it. It is as simple as removing your current pin box and bolting in the new one.

expert reply by: Shane H

0

Answer 1

The MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino #MR55QR has a 13.27" measurement from the center of the king pin to the center of the first bolt holes. This pin box has a Lippert Rhino bolt pattern so…

view full answer...

Answer 2

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is an approved replacement for 1621 and 1621HD pin boxes.

view full answer...

Answer 3

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box part #GY86GR isn't designed to be any longer than the pin box it replaces. I have attached the dimensions below so you can be sure but if you couldn't make full turns before, odds are…

view full answer...

Answer 4

My recommendation to replace a RhinoBox is to use the Curt Flex Air 5th Wheel Pin Box, #LC65VR. This is designed to replace a Lippert Rhino Box 21K Pin Box. (Curt, and TrailAir are both owned by Lippert, this is the same product as a Lippert…

view full answer...

Answer 5

The extended notation you have mentioned for the Lippert 1621 5th Wheel Pin Box part #LC1387883 is in regards to the style. This is also know as the "long" style and there are several other pin boxes with this style that have similar…

view full answer...

Answer 6

In general the height between the fifth wheel pin boxes aim for the same figures so that they don't cause the trailer to sit drastically different. I attached a dimension picture for the #325-GH-8040 for you to check out and compare to what you…

view full answer...

Answer 7

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box part #325-GH-8040 will have dimensions similar to the Lippert Trailair RotoFlex so you should not have an issue with the trailer not being level if you did not before. That said, I have attached a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 12

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Is Item # 325-GH-8040 Compatible With A 2021 Highland Ridge Roamer 354 MBH

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching