Will the Air Lift Air Shock Controller Compressor System Work with Air Lift 5000 Air Bags?

Question

Question:

Will the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers work with air lift 5000 air bags

asked by: Mike

0

Expert Reply:

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88399 will work with the Air Lift Air Shock Controller Compressor System for Air Shock Absorbers # AL25804.

expert reply by: Bob C

0

Answer 1

The Air Lift Air Shock Controller Compressor, part #AL25804 includes the onboard compressor; dash mounted gauge panel; hardware and air lines. An air tank isn't included. Since the compressor is manually operated from the dash panel, a pressure…

view full answer...

Answer 2

The Air Lift compressor kit part #AL25804 would work just fine to inflate the bags of the Air Lift 5000 part #AL88297 that fits your 2018 Ram 3500.

view full answer...

Answer 3

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...

Answer 4

I have a solution, but, the Air Lift Air Shock Controller Compressor System, #AL25804, that you referenced is designed to only work with air shocks not air bags. On an air bag helper spring system, I recommend the Firestone Air Command I Compressor…

view full answer...

Answer 5

The Air Lift compressor part #AL25804 that you referenced is capable of a max air pressure of 160 psi so it would easily fill your air bags to 60 psi.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...