Modifying / Trimming Corrner of SnapPad EQ Round Jack Pads

Question

Question:

My 2020 fleetwood discovery lxe 40m had the power gear 10 inch jacks. The front jack dish is close to a cross bar corner as shown in the picture. Can I trim the snap pad to allow installation?

asked by: Rick C

0

Expert Reply:

Modifying the SnapPadEQ Round Jack Pads , # SP64FR4, by trimming is not something that has been tested. Because these function by pressure that type of modification may have negative effect. These are not only sold in sets but individually as well for replacement needs. I suggest buying one and testing its fit, # SP64FR.

expert reply by: Michael R

0

Answer 1

I recommend the Jensen RV Stereo part #JWM60A to replace the LS6050DVD Magnadyn Liner series model in your RV. The Jensen brand is very reliable and has the same size cut out as the Linear series. It does feature am/fm and dvd/cd. It does not have…

view full answer...

Answer 2

Measure the diameter of the feet of your Power Gear setup and we'll be able to determine if the #SP64FR4 is a fit. This part number is for 10 inch diameter feet which is most likely what you have. If you had 9 inch diameter feet instead…

view full answer...

Answer 3

For an upgrade over the Drive stereo you have now the Jensen Stereo part #JWM60A that you referenced is our best choice. It essentially has all of the same features as the Drive while being a bit more reliable. It's designed for RV in-wall…

view full answer...

Answer 4

I recommend the Jensen RV Stereo #JWM60A to replace your Jensen Voyager AWM900 in your RV. This has almost identical overall dimensions (10-7/16" wide x 7" tall x 6-1/2" deep) and mounting dimensions (9" wide x…

view full answer...

Answer 5

I reached out to my contact at Jensen and he did say that your AWM975 model stereo has been out of production for a while. To replace the unit he said the best option is with the Jensen RV Stereo #JWM60A, which features the same cutout size and…

view full answer...

Answer 6

The Jensen RV Stereo AWM965 is not Bluetooth compatible nor am I aware of any adapter that would give the device this feature. Therefore, the best option would be to upgrade with the Jensen RV Stereo part #JWM60A. The Jensen JWM60A like the Jensen…

view full answer...

Answer 7

As far as the necessary mounting size hole and the features provided, the Jensen #JWM60A RV Stereo you'd looked at would be the best replacement. The stereo has an AM/FM tuner, can play DVDs or CDs, is Bluetooth compatible and has aux and USB…

view full answer...

Answer 8

The iRV RV Stereo, #IRV64FR is a Double DIN with HDMI, AUX, Bluetooth and App Control. This requires a cut out of 6-11/16" wide x 3-15/16" tall x 6-11/16" deep. This replacement stereo option will be closest to an exact fit for the cut…

view full answer...

Answer 9

The Jensen RV Stereo part #JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process…

view full answer...

Answer 10

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

view full answer...

Answer 11

The Jensen RV Stereo #JWM60A that you referenced is actually a very popular option with our customers to replace the Drive EEDV06. This will definitely provide you with an upgraded system both in function and reliability and because it features a…

view full answer...

Answer 12

The JWM62A actually replaced the #JWM60A and we decided to keep the old part number on our site. So if you ordered a #DV1230BL you'd actually get the current updated version JWM62A.

view full answer...