Does Curt Trailer Hitch Fit 2021 Kia Sorento SX X-Line Prestige

Question

Question:

Does this hitch fit the SX X-LIne, as they have differing bumpers. Thank you.

asked by: Alexander L

0

Expert Reply:

I verified with Curt, the manufacturer, that the hitch you asked about does indeed fit your 2021 Kia Sorento SX X-Line Prestige:

- Curt Trailer Hitch Receiver # C34ER

I have added a link below to the installation instructions as well if you'd like to check them out.

expert reply by: Kyle S

0

Answer 1

The Curt #C34ER Class III hitch is a fit for all models of the 2021 Kia Sorento, including the SX Prestige.

view full answer...

Answer 2

The most hidden trailer hitch we offer for your 2022 Hyundai Santa Fe is the Curt #C34ER which only has the lower hitch opening that hangs below the rear bumper. This makes it the least visible and also helps with ground clearance. I attached a…

view full answer...

Answer 3

There is indeed one trailer hitch receiver that is a fit for your 2022 Hyundai Santa Fe that has a completely concealed crosstube, which is from Curt: - Curt Trailer Hitch Receiver #C34ER I have added a photo below showing this hitch installed so…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 7

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

view full answer...

Answer 8

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I'm happy to say that there is indeed both a trailer hitch and trailer wiring for your 2024 Chevy Trax. The fits for both parts on your '24 Trax are the following: - Curt Trailer Hitch Receiver #C75VV - Tail Light Converter with 4-Pole Flat…

view full answer...

Answer 11

I have not heard of the T-One Vehicle Wiring Harness #TK26FR having a fire issue with your 2023 Kia Sorento Hybrid. Tekonsha has always had the better modules which are not as susceptible to water damage. I do believe the issues the Sorento had were…

view full answer...

Answer 12

The Curt #C34ER is designed to fit all versions of Kia Sorento in the 2022 model year, it will have no problem fitting your PHEV model in SX-Prestige trim. We haven't had the opportunity to install one of these on a 2022 as of yet, but I did…

view full answer...

Does Curt Trailer Hitch Fit 2021 Kia Sorento SX X-Line Prestige

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching