Stealth Hitches Required Parts for Trailer Towing With Mazda 3

Question

Question:

Does this SH27ZR trailer hitch really require the SH34ZR accessory bundle to allow towing or can you buy more specific parts on your own?

asked by: Tom

0

Expert Reply:

If you are towing with your 2016 Mazda 3 Hatchback you would need to get the Stealth Hitches Towing Kit w/ Ball Mount and Trailer Wiring # SH34ZR.

There are parts (chain hangers and bolts) that are not available by themselves.

expert reply by: Bud M

0

Answer 1

For your 2015 Mazda 3 the Curt hitch part #C11377 would be an excellent option. This hitch does not require any drilling or fascia trimming (when installed on a hatchback), and isn't too terribly heavy as it weighs 29 lbs. The most popular…

view full answer...

Answer 2

I reached out to Stealth Hitches and they said that the Stealth Hitches Hidden Rack Receiver #SH69ZR will fit your 2015 Volkswagen Golf GTI SE. This hitch has a 2" receiver and is completely concealed when the receiver is removed. It has a…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Stealth Hitches Required Parts for Trailer Towing With Mazda 3

Product Page this Question was Asked From

Continue Researching