Do Bearings Need To Be Replaced When Installing New Grease Seal?
Question:
For Livin Lite QuickSilver 6.0 motorcycle trailer. Do I need to replace the bearings too or just repack when replacing wheel bearing seal?
asked by: Stanley H
Expert Reply:
As long as the bearings are in good shape you can just repack the bearings and do not necessarily need to replace them.
With that said while you are doing the grease seal I would go ahead and just replace the bearings since it is cheap insurance that everything is in good working order.
Now to determine which bearings you need you will need to look for the bearing number stamped on the face of each bearing as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing number you will need to use digital calipers like # PTW80157 to precisely measure your spindle according to the included diagram.
If you can let me know your bearing combination I would be happy to recommend the correct replacements for you.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes