Can PressurePro FX 2 TPMS Sensors 372FX2K Be Used With Rubber Valve Stems?

Question

Question:

Can the sensors be used on tires with rubber valve stems? Does the extra weight cause any issues? Thank you

asked by: MICHAEL L

0

Expert Reply:

I reached out to PressurePro and the PressurePro FX 2 TPMS for RVs and Trailers - Smartphone Display - 2 Waterproof Sensors # 372FX2K you were looking at can be used on metal or rubber valve stems but they do encourage using a metal valve stem to avoid any possible issues.

With that said the TPMS sensors weigh 1/2 gram and they have not run into any instances where a valve stem that was in good shape experienced any damage.

I included a few videos of the # 372FX2K for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The PressurePro FX 2 TPMS for RVs and Trailers #372FX2K utilizes sealed sensors that the batteries are not replaceable. Since the sensors are sealed they utilize a more powerful battery that they say will last 3-4 years for everyday usage and 5-6…

view full answer...

Answer 2

We have just what you are looking for. I recommend the PressurePro FX 2 TPMS for RVs and Trailers - Smartphone Display - 2 Waterproof Sensors #372FX2K which is designed for smaller single axle trailers like yours, and only includes two TPMS sensors.…

view full answer...

Answer 3

For your 2018 Toyota Tundra I recommend the Titan Chains part #TC2533 which are a confirmed fit for your tire size of 275/65-18, are easy to install, and will provide great traction. They also don't require much clearance either as they are Class…

view full answer...

Answer 4

I have two great TPMS options for a single axle boat trailer, the PressurePro FX 2 TPMS for RVs and Trailers part #372FX2K or the TireMinder TPMS for Single Axle Trailers part #TPMS-TRL-2. The best system really comes down to preference as the main…

view full answer...

Answer 5

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Can PressurePro FX 2 TPMS Sensors 372FX2K Be Used With Rubber Valve Stems?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching