Which Roadmaster Rear Sway Bar Fits 2016 Jayco Precept 31UL

Question

Question:

My installer tells me he does not have enough room for the shock to clear the bracket. This kit is the one recommended by etrailer for my make and model. Is my installer doing something wrong or is there a way to make the bracket fit so it does not hit the shock?

asked by: Greg J

0

Expert Reply:

Since your 2016 Jayco Precept 31UL is built on a 23k GVWR chassis the correct Roadmaster sway bar is the part # RM-1139-149.

expert reply by: Jameson C

0

Answer 1

It looks like your 2011 Georgetown 350TS sits on the Ford F53 chassis. (20,500 GVWR) Many F53 Users report sway in the ride. Yes, I would get the Roadmaster #RM-RBK22-RSSA Steering Stabliliser with mounting brackets. Next I would adding the…

view full answer...

Answer 2

While both the Timbren Suspension Enhancement System #TFFF53B & #TFRF53A and the SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 & #SSR-180-54-1 are both great solutions for your 2019 Jayco Precept 31UL, there are some differences to…

view full answer...

Answer 3

For your 18k 2016 Jayco Alante 26AY the correct SumoSpring kit is the part #SSF-170-40-2 for the front axle. This kit is designed for GVWRs of between 16k and 22k which will work perfectly for you. Recently SumoSprings changed quite a few of their…

view full answer...

Answer 4

The best way to adjust handling on your 2017 Ford F53 18K chassis is to start with anti-sway bars. I recommend starting in the back with the Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-146. Then I recommend the Roadmaster Front Anti-Sway…

view full answer...

Answer 5

It sounds like you meant that the Fleetwood Bounder is on a 2019 Ford F-53 chassis which is very common. The first step in increasing the stability of the 2020 Fleetwood Bounder on the 2019 Ford F-53 chassis is to replace the factory sway bars. The…

view full answer...

Answer 6

I checked with Roadmaster and verified the correct front anti-sway bar for your Class A 2017 Ford F-53 chassis with a 18,000 lb GVWR; it is the following part number: - Roadmaster Front Anti-Sway Bar #RM-1139-148

view full answer...

Answer 7

Your 2018 Thor Hurricane is built on a Ford F-53 chassis. For the front of your motorhome, I recommend the Roadmaster Front Anti-Sway Bar #RM-1139-148 and for the rear you can use the Roadmaster Rear Anti-Sway Bar #RM-1139-146 if your Hurricane is a…

view full answer...

Answer 8

The Roadmaster Front Anti-Sway Bar #RM-1139-148, which is confirmed to fit the F-53 chassis that your Jayco Precept is built on, features the same 1-3/4 inch diameter as the existing Hellwig Sway Bar that you have installed. The Roadmaster model is a…

view full answer...

Answer 9

For a Thor Windsport based on a 2016 Ford F-53 V10 chassis the front-axle stabilizers we offer all require you to remove the factory sway bar. We have no front-axle kits that avoid this step. The Roadmaster #RM-1139-148 is the appropriate one for…

view full answer...

Answer 10

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 11

The best option by far for your 2016 Thor Hurricane motorhome, built on a Ford F-53 chassis, are anti-sway bars. SumoSprings are a decent option that can help when the back-and-forth sway starts, but for the most control, your best suspension…

view full answer...

Answer 12

Since your 2017 Thor Hurricane is built on a Ford F-53 chassis that has an 18k the correct Roadmaster rear sway bar part number is the #RM-1139-146. I attached an install video for this for you to check out as well.

view full answer...

Which Roadmaster Rear Sway Bar Fits 2016 Jayco Precept 31UL

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching