Locating Reverse Light Circuit on 2001 Dodge Ram 1500
Question:
Do you have an instruction manual or diagram on how to connect the blue wire of this 5-way flat vehicle end to the reverse lights? I have a 2001 Dodge Ram 1500. My boat trailer has a 5-way flat connector, wherein the blue wire disengages the brakes whenever the backup light is activated. Im not sure how to connect the vehicle ends corresponding wire to the backup lights.
asked by: Josh M
Helpful Expert Reply:
I do not have any information that is specific to your 2001 Ram, but I can certainly help you through the process.
The easiest way to do this is to access the rear of one of your tail light assemblies, as if you were replacing a burned out bulb. Once you look at the rear of the assembly, it should be immediately evident which wire feeds the reverse light (clear bulb). You would tap the wire with the blue stripe into that circuit, using a butt connector like part # DW05714. Be sure to wrap your connection in electrical tape to isolate moisture and dirt from your connection.
Before tapping into the wire, use a circuit tester like part # 3808 to check the wire. It should show voltage only when the transmission is placed into reverse.
Products Referenced in This Question
Butt Connector - PVC - for 16-14g Wire - Qty. 1
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
Hopkins Endurance 5-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 5 Flat
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Brake Controller
- Shop: Weld-On Hinge w/ Brass Bushing and Grease Zerk - Steel - 3-3/16" Long - 5/16" Pin Diameter
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Article: Trailer Wiring Diagrams
- Shop: Towing Mirrors
- Video: Trailer Wiring Harness Installation - 2001 Dodge Ram
- Shop: Trailer Hitch
- Video: Trailer Wiring Harness Adapter Installation - 2010 Ford Explorer
- Video: CIPA Towing Mirrors Installation - 2012 Ram 1500
- Video: K-Source Custom Towing Mirrors Installation - 2012 Ram 1500
- Video: Review of LaSalle Bristol - RV Sinks - 34465CAR61032
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Video: Trailer Hitch Installation - 2007 Ford Explorer - Curt
- Video: Curt 4-Way Flat to 5-Way Flat Trailer Connector Adapter Installation - 2010 Acura MDX
- Q&A: Right Turn Signal on Trailer Works But Right Brake Does Not
- Q&A: Circuit Tester for Finding the Brake Signal Wire for a Brake Controller on a 2007 Dodge Dakota
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Parts Needed to Convert 5,200 lb Trailer Axle to Stainless Rotors
- Q&A: Recommended Wiring Harness for a 2023 Hyundai Palisade
- Q&A: Does 4-Way Trailer Wiring Harness Have Reverse Light Feature
- Q&A: Determining Color Wire for 7 Pin Trailer Wiring Harness on 2005 Ford F-150
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Wire Reverse Lights on a Trailer with a 4-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Bleed Your Trailer Surge Brakes
on Trailer Wiring
