Will Draw-Tite Class II 34693 Hitch from 2017 Subaru Legacy Fit 2019 Subaru Outback
Question:
In 18 I had the Drawtite 36493 installed on my 17 Legacy. Im considering buying a 19 Outback. Can the the hitch be removed from the Legacy and installed on the Outback by a professional?
asked by: TJ B
Expert Reply:
The Draw-Tite Class II hitch # 36493 will indeed fit both the 2017 Subaru Legacy and the 2019 Subaru Outback. However, Draw-Tite doesn't recommend reusing the hardware as it's only meant for a one-time use.
We sell replacement hardware as part # RHK. Use the provided link to go to the # RHK product page, and type in '34693' into the provided field then choose 'Draw-Tite' from the drop down menu. If you'll be towing with the Outback, you'll need a few other items to complete your towing setup. For a trailer wiring harness, use part # 118467, for a ball mount use # 36051 and # 19256 for a 1-7/8 inch trailer ball or # 19258 for a 2 inch ball.
I've linked to some install videos that you might find helpful.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Q&A: Best Trailer Hitch for 2019 Subaru Outback Limited
- Q&A: What is a Draw Bar and Is It Needed to Install Trailer Hitch 24847
- Q&A: Troubleshooting Brake Controller Not Working When Brakes Are Applied but Works With Override Switch
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Comparing EcoHitch, Curt, and Draw-Tite Trailer Htches for a 2019 Volkswagen Golf Alltrack
- Q&A: Comparing Hollywood Sport Rider and Thule EasyFold XT Bike Racks for Electric Fat Tire Bikes
- Q&A: Recommend Trailer Hitch for a 2013 Subaru Outback Wagon
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)