Is There a Hitch Available to Fit a 2020 Hyundai Elantra GT N-Line
Question:
Do you have a trailer hitch and wiring for a 2020 Hyundai Elantra GT N Line?
asked by: Doug W
Helpful Expert Reply:
Yes. The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24905 will fit on your 2020 Hyundai Elantra GT N-Line as long as your vehicle was NOT manufactured in South Korea; the vehicles that were manufactured in South Korea do not have holes drilled for a hitch and thus have not been tested for compatibility. You can check the door manufacture sticker or VIN to determine where your vehicle was made; VIN with the second letter M denotes Korean-built.
For wiring you'll want to use the Tekonsha T-One Wiring Harness # 118692, which will give you a 4 way trailer wiring harness on your Elantra GT N-Line. To complete a towing setup you'll need a drawbar and hitch ball. For the drawbar I recommend the Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs # 3594, which comes with a hitch pin included. Then you'll need a hitch ball; you can use either the # 19256 (1-7/8" hitch ball) or # 19258 (2" hitch ball) depending on the trailer you'll be towing.
I've linked some review and installation videos of some of these parts for you to check out, as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Trailer Hitch for Carrying Bike Rack with 2020 Hyundai Elantra
- Q&A: What Is Needed To Safely Flat Tow A 2023 Chevy Silverado 1500
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Installed Clearance Dimension for Curt Trailer Hitch C11400 on 2016 Hyundai Elantra GT Hatchback
- Q&A: Availability of Hitch for 2018 Hyundai Elantra Sport GT Hatchback
- Q&A: Towing Small Jon Boat with 2013 Hyundai Elantra GT
- Q&A: Trailer Hitch Availability for 2020 Hyundai Elantra Sedan
- Q&A: Hitch Fit for 2018 Hyundai Elantra Sport
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: 2023 Best Gifts for Haulers & Towers
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Best Bike Racks for Electric Bikes
- Article: My Trailer Hitch Doesn't Fit