Dimensions of Cam Lock

Question

Question:

Need complete dimensions for your item CAM44363. I need a lock with barrel 5/8 wide, barrel 1 1/8 long, and cam 1 3/4 long although I can probably reuse the cam I have. Also, might be good to include complete dimensions on all these product descriptions. Just sayin.

asked by: Robert D

0

Expert Reply:

Thanks for your question, we pulled a part from the warehouse and measured the diameter at 0.733" so just under 3/4" with the flat sides measuring at 5/8". The thickness of the Camco Cam Locks is measured from the back of the face of the lock to the latch. The length of the straight cam is 1-9/16" with offset being 2"

expert reply by: Michael R

0

Cam Dia.
(click to enlarge)

Cam Thick
(click to enlarge)

Answer 1

You could leave the The Club Compact Utility Lock #WIUTL801 attached to your bike frame as you are riding it or you could put it in a backpack if you were carrying one while riding.

view full answer...

Answer 2

The thickness of the Camco Cam Locks is measured from the bottom of the threads to the cam. I attached a diagram showing where we measure the thickness for your reference. Based on the photo of your Cam Lock, the Camco Cam Lock #CAM44323 will replace…

view full answer...

Answer 3

The thickness of the Camco Cam Locks is measured from the back of the face of the lock to the latch (see photo). Based on the photo you submitted, I believe you would want the Camco Cam Lock -1-1/8 Thick, #CAM44363. This lock measures 1-1/8 inches…

view full answer...

Answer 4

Thank you for reaching out about the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras #FR98NR (or at least that's what it sounds like you're referring to). The camera and lights for this kit actually have…

view full answer...

Answer 5

We do have replacement cam locks for campers with the part #BA56FR which you'd just need to select keyed alike from the drop down menu and we'd ship you out all lock cores keyed the same.

view full answer...

Answer 6

The Deluxe Compartment Door Key Lock #37200155 doesn't have the ability to be ordered keyed alike so for that option you'll need to look at the Replacement Cam Lock for RVs #BA56FR instead. This measures 7/8" long x 3/4" diameter…

view full answer...

Answer 7

The 3-3/4" measurement is measuring to the triangle piece/gusset. This does have some slight variation depending on the weld. After measuring I found that the distance from the center of the closest hole to the base of the gusset is…

view full answer...

Answer 8

I confirmed with my contact at Rhino-Rack that if you have the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers #RRVA180B-RRRLT600 to go over your Retrax XR on your 2021 Chevrolet Silverado 1500, you will not need any extra…

view full answer...

Answer 9

The bolt pattern of your existing hubs is likely to be 5-on-4-1/2 as this is a popular configuration, but there are actually four different 5-lug bolt patterns available in our replacement hub/drum products. You can refer to the linked article on…

view full answer...

Answer 10

It would be the motor of your Kwikee steps and you'd need the part #LC379147 to fix it and get it going again.

view full answer...

Dimensions of Cam Lock

Product Page this Question was Asked From

Continue Researching