Dimensions of Yates Rubber YR8000 Boat Trailer Keel Roller
Question:
Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 8 Long - 5/8 Shaft Item # YR8000 I am working on a trailer redesign for our 1962 Alumicraft Queen Merrie. I am looking for an appropriate roller for the center Keel. I am wondering what the diameter of this roller is in the center where the keel would normally sit. The Plan would be to have 3 of these to cover 2/3 of the boat length. Outside of this there will be two bunkers on either side of the trailer to carry most of the weight. Please let me know this diameter and if there is a different Keel roller that you would recommend for our boats design. Thank you
asked by: Christopher S
Expert Reply:
The Yates Rubber # YR8000 keel roller has a 3-3/8 inch diameter at the ends, a 2-1/4 inch diameter at the flat spot in the center and is 7-3/4 inches long. The roller would use a 5/8 inch diameter shaft such as part
# CE10725A and would mount using panel brackets like # CE10303G that would attach to the trailer crossmembers.
It sounds like you have a good idea of the set up you need. The keel rollers help guide the boat onto the trailer so that the hull sits straight on the bunks. The rollers and the bunks will all help support the weight of the boat.
Products Referenced in This Question
CE Smith Panel Bracket for 8" Boat Trailer Rollers - Galvanized Steel
- Boat Trailer Parts
- Rollers
- Roller Bracket
- 3-1/2 Inch Tall
- 7-3/4 Inch Wide
- Galvanized Steel
- 8-1/8 Inch Long
- CE Smith
more information >
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 8-7/8" x 5/8"
- Boat Trailer Parts
- Rollers
- Roller Shafts
- 5/8 Inch Diameter
- Zinc-Plated Steel
- 8-7/8 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 8" Long - 5/8" Shaft
- Boat Trailer Parts
- Rollers
- Keel Roller
- 3-3/8 Inch Diameter
- Black Rubber
- 7-3/4 Inch Long
- Fits 5/8 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Shop: Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 8" Long - 5/8" Shaft
- Shop: Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 8" Long - 5/8" Shaft
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR8000 Review
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8"
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8"
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 8-7/8" x 5/8"
- Video: CE Smith Boat Trailer Roller Shaft with Pal Nuts Review
- Q&A: What Are The Torque Specs for 5/8" Lug Studs and Flange Nuts
- Shop: Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 5/8"
- Shop: CE Smith Bolster Bracket - Aluminum - 8" Tall - Qty 1
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10100A40
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 44649
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: dust caps
- Video: Roadmaster InvisiBrake Braking System Installation - 2020 GMC Canyon
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Shop: Brake Controller
- Video: Review of etrailer Enclosed Trailer Transition Plate - e32JR
- Search Results: dust cap