Dimensions of the TorkLift Battery Box # TLA7710R

Question

Question:

I am finding conflicting dimensions on the product on this page. https://www.etrailer.com/p-TLA7710R.html The manufacturer has it wider which won’t fit my needs. Can you verify the exact width for me please

asked by: Danny S

0

Expert Reply:

The dimensions of the TorkLift PowerArmor Locking Battery Box # TLA7710R are 58-1/2" x 7-5/8" x 12-3/4".

expert reply by: Jacob H

0

Answer 1

Yes, the TorkLift PowerArmor Locking Battery Box #TLA7710R is sturdy enough to mount on an A-frame trailer without using extensive bracing. I attached a picture of someone who did something similar.

view full answer...

Answer 2

The closest offering we have would be the Torklift Power Armor Locking Battery Box, part #TLA7708R which measures 8-3/16 x 23 x 13. If you were to take an angle grinder and take a small bit of material off of one of the rails, the box could be made…

view full answer...

Answer 3

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 4

The dimensions of a Group 27 battery are 12 inches long by 6-5/8 inches wide by 9-3/16 inches tall so for a box that can carry two of them we have the TorkLift PowerArmor Locking Battery Box #TLA7708R which has dimensions of 26-3/4" long x…

view full answer...

Answer 5

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 6

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 7

The Torklift Battery Mounting Box part #TLA7708R or #TLA7700L that you referenced can mount to the brackets you have on your trailer as there are several holes on the bottom of the box that you can use to run bolts through to then attach to your…

view full answer...

Answer 8

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 9

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 10

The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size. The box…

view full answer...

Answer 11

Great question, lets have a look at this unit and see what we can figure out. **Commercial Grade Battery Box for Group 8D Batteries - Vented #329-HM484. *TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum…

view full answer...

Answer 12

The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both great brake controller options. The best option for you will be dependent on where you will be doing…

view full answer...

Dimensions of the TorkLift Battery Box # TLA7710R

Product Page this Question was Asked From

Continue Researching